Yamaha MOTIF6, MOTIF7, MOTIF8, Music Production Synthesizer 2 Assign the desired voice to each part, 1 Call up the VOICE display by pressing the

Editing Performances (Layer/Split)

Editing Performances (Layer/Split)

Basic Structure (page 45) · Reference (page 170)

Performances can be made up of a maximum of four parts (voices), selected from the internal tone generator Parts 1 - 4 and Plug-in board Parts 1 - 3.

You can create a performance by layering several voices together, and by assigning different voices to separate ranges of the keyboard. You can then store up to 128 of your original, edited performances to internal User memory.

Layer

Split

Built-in tone generator parts

Plug-in parts

Built-in tone generator parts

Plug-in parts

PRE1

PRE2

PRE3 USER

PL1

PL2

PL3

PRE1

PRE2

PRE3 USER

PL1

PL2

PL3

1 Call up the VOICE display by pressing the	2 Assign the desired voice to each part.
[F3] button in the Performance Play mode.	Move the cursor to the desired part and select a voice by pressing the [F1] or
	[F2] button.

DEC/NOINC/YES

SONG SCENE						SONG SCENE	SF 2	SF 3	SF 4	SF 5	INFORMATION
					INFORMATION	SF 1
SF 1	SF 2	SF 3	SF 4	SF 5

F1	F2	F3	F4	F5	F1	F2	F3	F4	F5	F6
					F6

Assign the built-in voice	Assign the Plug-in voice	Delete the voice assignment
to the selected part.		of the selected part.
	to the selected part.

	MODE
EFFECTBYPASS ARPEGGIO	BANK
	SEQUENCER
	GROUP
SEQ TRANSPORT
	NUMBER

Quick Start Guide

3	Specify the note range of each part, as required.
	You can set the lowest note of the range over which the voice of the selected part
	sounds by pressing the desired key while holding the [SF4] button. To set the
	highest note of the range, press the desired key while holding the [SF5] button.
	This lets you create a split keyboard, with up to four different parts (voices)
	sounding in four different ranges. You can also overlap parts to create layers.
	Note Limit Low	Note Limit High
	SF 4	SF 5

4 Change the volume of each part and adjust the relative balance among the four parts by using the Control sliders.

	PAN	REVERB	CHORUS	TEMPO
	CUTOFF	RESONANCE	ATTACK	RELEASE
KNOB	ASSIGN A	ASSIGN B	ASSIGN 1	ASSIGN 2
CONTROL
FUNCTION
	KN 1	KN 2	KN 3	KN 4
	MEQ LOW	MEQLOWMID MEQ HI MID		MEQ HIGH
MASTER	VOLUME 1	VOLUME 2	VOLUME 3	VOLUME 4
VOLUME

CS 1 CS 2 CS 3 CS 4

MOTIF Quick Start Guide 89