Yamaha MOTIF6, MOTIF7, MOTIF8, Music Production Synthesizer • Bank, • Number, ■ Part edit, • Mono/Poly, • Reverb Pan, • Reverb Type, • Part Switch, • Reverb Return, • Chorus to Reverb, Common Effect Parameter

Performance Edit mode

• Chorus to Reverb

Determines the Send level of the signal sent from the Chorus Effect to the Reverb Effect.

❏ Settings 0 ~ 127

• Reverb Type

Determines the Reverb effect type.

❏ Settings Refer to the Effect Types list in the separate Data List booklet.

• Reverb Return

Determines the Return level of the Reverb Effect. ❏ Settings 0 ~ 127

• Reverb Pan

Determines the pan position of the Reverb effect sound. ❏ Settings L64 (far left) ~ cnt (center) ~ R63 (far right)

● [F6]-[SF2], [SF3], [SF4], [SF5]Common Effect Parameter

Plug-in Insertion, Reverb, Chorus,

Variation

Basic Structure (page 39)

	The number of parameters and values available
	differs depending on the currently selected effect
	type. For more information, see the Effect Type List
	in the separate Data List booklet.
	■ Part edit
Reference
	You can select a voice for each part. When the
	● [F1]-[SF1] Part Voice Voice
Performance	cursor is located at the Bank, you can select a voice
	~ page 125).
	by using the BANK, GROUP, NUMBER button
	with the [TRACK SELECT] indicator off (page 124
mode

• Part Switch

Set each part to on or off. ❏ Settings on, off

• Bank

Select a Voice Bank (page 124) for each part. For details about the Plug-in Voice Bank, refer to the Owner’s Manual for your Plug-in Board.)

• Number

Select a Voice Program number (page 124) for each part. For details about the Plug-in Voice Program number, refer to the Owner’s Manual for your Plug-in Board.)

●[F1]-[SF2] Part Voice Play Mode

• Mono/Poly

Select monophonic or polyphonic playback for each part. Select whether the Voice is played back monophonically (single notes only) or polyphonically (multiple simultaneous notes).

❏ Settings Mono, Poly

nThis parameter is not available for the part to which the Drum Voice is assigned.

•ArpeggioSw (Arpeggio Switch)

Switch the Arpeggio for the currently selected Part on or off. ❏ Settings on, off

●[F1]-[SF3] Part Voice Limit• Note Limit H, L (High, Low)

Set the lowest and highest notes of the keyboard range for each Part. Each Part will only sound for notes played within its specified range.

❏Settings C -2~G8

nIf you specify the highest note first and the lowest note second, for example “C5 to C4,” then the note range covered will be “C-2 to C4” and “C5 to G8.”

nYou can set the note by pressing the keyboard while holding the [INFORMATION] button.

nWhen a Plug-in voice is assigned to a part of the selected Performance, some parameters may not be available depending on the installed Plug-in board.

•Velocity Limit H, L (High, Low)

Set the minimum and maximum values of the velocity range within which each Part will respond. Each Part will only sound for notes played within its specified velocity range.

❏Settings 1~127

nIf you specify the maximum value first and the minimum value second, for example “93 to 34,” then the velocity range covered will be “1 to 34” and “93 to 127.”

170MOTIF Reference