Yamaha MOTIF6, MOTIF7, MOTIF8, Music Production Synthesizer • Type, • Bank, •Number, •Category, ■Drum Key Edit, • RevSend (Reverb Send), • ChoSend (Chorus Send), • OutputSel (Output Select)

Voice Edit mode

●[F6]-[SF2], [SF3], [SF4], [SF5] Drum CommonEffect Parameter Insertion 1, 2, Reverb, Chorus

The number of parameters and values available differs depending on the currently selected effect type. For more information, see the Effect Type List in the separate Data List booklet.

■Drum Key Edit●[F1]-[SF1] Drum Key Oscillator Wave

From this display you can select the desired wave or Normal voice used for the individual Drum key.

• Type

Determines whether a Wave or a Normal voice is to be used for the selected key. Also, use the Bank, Number and Category parameters below to specify the desired Wave or Normal voice.

Reference	❏ Settings	pre wave (Preset wave), voice, usr wave
		(User wave)
	n When the Type is set to “voice” here, some
	parameters in the Drum Voice Edit mode cannot be
Voice	edited.
	• ElementSw (Element Switch)
mode
	This parameter is available when Type (above) is set to
	“pre wave” or “user wave.” This determines whether the
	currently selected key is on or off, or in other words,
	whether the wave for the key is active or inactive.
	❏ Settings	on, off

• Bank

This parameter is available when Type (above) is set to “voice.” Any of the Normal voice banks can be selected.

nPlug-in voices cannot be selected for Drum keys.

•Number

Determines the Wave/Voice number. The number differs depending on the selected Type.

❏Settings

When Type is set to “pre wave”: 001 ~ 1309

When Type is set to “voice”: 001 ~ 128

When Type is set to “usr wave”: 001 ~ 256

For more information about available Waves and Voices, refer to the separate Data List booklet.

•Category

Determines the Category of the Wave/Normal Voice. If you switch to another Category, the first Wave/Normal Voice in that Category will be selected.

❏ Settings For more information about the Categories, refer to the separate Data List booklet.

●[F1]-[SF2] Drum Key Oscillator Output

From this display you can set certain output parameters for the selected Drum key.

• InsEFOut (Insertion Effect Output)

Determines which Insertion effect (1 or 2) is used to process each individual Drum key. The “thru” setting lets you bypass the Insertion effects for the specific key.

❏ Settings thru, ins1 (Insertion Effect 1), ins2 (Insertion Effect 2)

• RevSend (Reverb Send)

Determines the level of the Drum key sound (the bypassed signal) that is sent to Reverb effect. A setting of “0” results in no Reverb processing of the Drum key sound. This is available only when Insertion Effect Output (above) is set to “thru.”

❏ Settings 0 ~ 127

• ChoSend (Chorus Send)

Determines the level of the Drum key sound (the bypassed signal) that is sent to Chorus effect. A setting of “0” results in no Chorus processing of the Drum key sound. This is available only when Insertion Effect Output (above) is set to “thru.”

❏ Settings 0 ~ 127

• OutputSel (Output Select)

Determines the specific output(s) for the individual Drum key signal. You can assign each individual Drum key sound to be output from a specific hardware output jack on the rear panel. By installing the optional AIEB2 board, you can expand the number of assignable outputs.

❏ Settings See below.

LCD	Output jacks	Stereo/
		Mono
L&R	OUTPUT L and R	Stereo
asL&R	ASSIGNABLE OUTPUT L and R	Stereo
as1&2	ASSIGNABLE OUTPUT 1 and 2 on the AIEB2	Stereo	*
		1 : L
		2 : R
as3&4	ASSIGNABLE OUTPUT 3 and 4 on the AIEB2	Stereo	*
		3 : L
		4 : R
as5&6	ASSIGNABLE OUTPUT 5 and 6 on the AIEB2	Stereo	*
		5 : L
		6 : R
asL	ASSIGNABLE OUTPUT L	Mono
asR	ASSIGNABLE OUTPUT R	Mono
as1	ASSIGNABLE OUTPUT 1 on the AIEB2	Mono	*
as2	ASSIGNABLE OUTPUT 2 on the AIEB2	Mono	*
as3	ASSIGNABLE OUTPUT 3 on the AIEB2	Mono	*
as4	ASSIGNABLE OUTPUT 4 on the AIEB2	Mono	*
as5	ASSIGNABLE OUTPUT 5 on the AIEB2	Mono	*
as6	ASSIGNABLE OUTPUT 6 on the AIEB2	Mono	*

* Available only when the optional AIEB2 board has been installed.

150MOTIF Reference