Pattern Job mode

The Pattern Job mode contains a comprehensive set of editing tools and functions you can use to change the sound of your original pattern, as created by the Pattern Patch function or from the Pattern Record mode. It also includes a variety of convenient operations, such as copying or erasing data. Most of these operations can be performed on either an entire track or a selected range of measures in the track.

◆Basic Procedure

1 In the Pattern Play mode, select a style and section you wish to execute the Job on.

2 Press the [JOB] button to enter Pattern Job Mode.

3 Select the desired Job menu by pressing the appropriate button, [F2] - [F6].

4 Use the CURSOR buttons to scroll to the desired Job.

5 Press the [ENTER] button to go to the selected Job display.

6 Set the relevant Job parameters.

7 Press the [ENTER] button. (The display prompts you for confirmation.)

8 Press the [INC/YES] button to execute the Job. After the Job has been completed, a “Completed” message appears and operation returns to the original display.

nTo cancel the Job, press the [DEC/NO] button.

For Jobs that take longer to process, you will see the message “Executing…” during processing. If you switch off the power of the MOTIF while this message is displayed, you risk corrupting your data.

9 If you wish to undo the changes made in the steps above, press the [F1] button and (to select Undo/ Redo) and use the Undo function.

Pattern Job mode

10Press the [PATTERN] button to exit from the Pattern Job mode and return to the Pattern Play mode.

•For detailed instructions on steps #3 - #9, see the explanations below.

[F1] Undo/Redo

The explanations here apply to step #9 of the Basic Procedure on see below.

The operations are the same as in the Song Job mode. See page 193.

Undo/Redo does not work with sample voice operations.

[F2] Note data Job

Press the [F2] button in step #3 of the Basic Procedure (see below), so that the Note data Job list appears on the display. Scroll the cursor to the desired Job and press the [ENTER] button to go to the display of the selected Job.

The following explanations apply to step #6 of the Basic Procedure see above.

nThe Note data Jobs in the Pattern mode are basically

mode

 

same as in the Song Job mode. However, unlike in the

Pattern

phrases (001 - 256) and a selected range in the phrase

Song Job mode, Pattern Note data Jobs are applied to the

 

(measure : beat : clock).

Reference

● [F2]-01 Quantize

 

Specify the phrase and the range (in measures/ beats/clocks) over which the Job is applied.

Same as in the Song Job mode. See page 194.

MOTIF Reference 225