PAN

REVERB

CHORUS

TEMPO

 

CUTOFF

RESONANCE

ATTACK

RELEASE

KNOB

ASSIGN A

ASSIGN B

ASSIGN 1

ASSIGN 2

CONTROL

 

 

 

 

FUNCTION

 

 

 

 

 

KN 1

KN 2

KN 3

KN 4

 

MEQ LOW

MEQLOWMID MEQ HI MID

MEQ HIGH

❏ Settings -64 ~ +63

●[F1]-[SF4] Common General Portamento

From this display you can set the Portamento parameters for all parts of the selected performance. Portamento is used to create a smooth transition in pitch from the first note played on the keyboard to the next.

• Switch

Determines whether Portamento is on or off for the entire performance. Keep in mind that this is a global control; you can also switch Portamento on and off for individual parts in Part Switch below.

❏ Settings off, on

• Time

Determines the pitch transition time.

This parameter offsets the same parameter in the part edit settings (page 170). Higher values result in longer transition times.

❏ Settings -64 ~ +63

• PartSwitch

Determines whether Portamento is on or off for each individual part.

●[F1]-[SF5] Common General Other

From this display you can set the control functions for the Knobs and related parameters.

Performance Edit mode

With the exception of Pitch Bend, which cannot be set here, these parameters are the same as in the Voice Edit mode (page 132).

●[F2]-[SF1] Common Output

• Volume

Determines the output level of the selected performance. You can adjust the overall volume, keeping the balance between all parts .

❏ Settings 0 ~ 127

• Pan

Determines the stereo pan position of the selected performance.

This parameter offsets the same parameter in the part edit setting (page 163).

You can also adjust this parameter using the PAN knob on the front panel.

❏ Settings L63 (Left) ~ C (Center) ~ R63 (Right)

nA setting of “C” (center) maintains the individual Pan settings of each Part.

•RevSend

Determines the Send level of the signal sent from Insertion

mode

Effect 1/2 (or the bypassed signal) to the Reverb effect.

 

You can also adjust this parameter using the REVERB

Performance

knob on the front panel.

 

❏ Settings 0 ~ 127

 

• ChoSend

Determines the Send level of the signal sent from Insertion

Reference

 

Effect 1/2 (or the bypassed signal) to the Chorus effect.

 

You can also adjust this parameter using the [CHORUS]

 

knob on the front panel.

 

❏ Settings 0 ~127

 

MOTIF Reference 167