Yamaha MOTIF6, MOTIF7, MOTIF8, Music Production Synthesizer • Pan, • Bank, • Type, • Tempo, • Volume, • Switch, • ChoCtrl, • RevSend, • ChoSend, • Knob Assign, • PBUpper, PBLower, ● [F2] Normal Common Output

Voice Edit mode

time

Sets the Time parameter range to reflect “time”: 0 (fast) - 127 (slow)

●[F1]-[SF5] Normal Common General Other

From this display you can set the control functions for the Knobs, and determine the up/down range for the Pitch Bend wheel.

• Knob Assign

Determines the function for the assignable Knobs (1-4). Pressing the [KNOB CONTROL FUNCTION] button on the panel sets the desired function row, which is automatically stored to memory with the currently selected voice.

❏Settings

	Pan & Send		Tone
			PAN	REVERB	CHORUS	TEMPO
		CUTOFF		RESONANCE	ATTACK	RELEASE
	KNOB	ASSIGN A		ASSIGN B	ASSIGN 1	ASSIGN 2
	CONTROL
Reference	FUNCTION
		MEQ LOW		MEQLOWMID MEQ HI MID		MEQ HIGH
			KN 1	KN 2	KN 3	KN 4
Voice	MeqGain		Assign
mode	• ChoCtrl
	Determines the depth of the Chorus effect, as controlled by
	the Knob assigned to Chorus Send.
	❏ Settings		-64 ~ 63
	• PBUpper, PBLower
	These two parameters determine the pitch change range of
	the Pitch Bend wheel.
	❏ Settings		-48 ~ 24

• Assign A, Assign B, Assign 1, Assign 2

This lets you directly set and memorize the value for each Assign Knob (A, B, 1, and 2), from the Knob itself. Simply tweak the knob to the desired setting.

● [F2] Normal Common Output

• Volume

Determines the output level of the Voice. ❏ Settings 0 ~ 127

• Pan

Determines the stereo pan position of the Voice. You can also adjust this parameter using the PAN knob on the front panel.

❏ Settings L63 (Left) ~ C (Center) ~ R63 (Right)

• RevSend

Determines the Send level of the signal sent from Insertion Effect 1/2 (or the bypassed signal) to the Reverb effect. You can also adjust this parameter using the REVERB knob on the front panel.

❏ Settings 0 ~ 127

• ChoSend

Determines the Send level of the signal sent from Insertion Effect 1/2 (or the bypassed signal) to the Chorus effect. You can also adjust this parameter using the [CHORUS] knob on the front panel of the MOTIF.

❏ Settings 0 ~ 127

●[F3]-[SF1] Normal Common Arpeggio Arpeggio type

Basic Structure (page 55)

The basic parameters (e.g., type, tempo) of the Arpeggio are provided in this display.

When user arpeggio is selected, you can clear the selected arpeggio data by using the [SF5] button.

This apppears only when user arpeggio is selected and cursor is located at Type.

• Bank

Determines the Bank.

❏ Settings pre1, pre2, user

• Type

Determines the Arpeggio type. The two-letter prefix before the name indicates the general Arpeggio category.

• Tempo

Determines the Arpeggio Tempo. When MIDI sync (page 258) is turned on, “MIDI” is displayed here and cannot be set.

❏ Settings 1 ~ 300

• Switch

Determines whether Arpeggio is on or off. You can also turn Arpeggio on/off from the front panel with the [ARPEGGIO ON/OFF] button.

❏ Settings off, on

132MOTIF Reference