Voice Edit mode

●[F5]-[SF2] Normal Common LFO Delay

From this display you can set various delay and fade-in/-out parameters, and give the LFO a more natural sound.

• DelayTime

Determines the delay time before the LFO comes into effect. A higher value results in a longer delay time.

❏ Settings

0 ~ 127

Short delay

Long delay

Key on

Key on

• FadeInTime

Determines the amount of time for the LFO effect to fade in (after the Delay time has elapsed). A higher value results in a slower fade-in.

Reference

❏ Settings 0 ~ 127

Low FadeIn value

 

FadeIn

 

Max

Voice

Faster fade-in

Time

mode

Delay

 

 

Key on

FadeIn

Max

High FadeIn value

Slower fade-in

Time

Delay

Key on

• HoldTime

Determines the length of time during which the LFO is held at its maximum level. A higher value results in a longer Hold time.

❏ Settings 0 ~ 127

Hold

Max

Time

• FadeOutTime

Determines the amount of time for the LFO effect to fade out (after the Delay time has elapsed). A higher value results in a slower fade-out.

❏ Settings 0 ~ 127

Hold FadeOut

Max

Low FadeOut value

Faster fade-out

Time

HoldFadeOut

Max

High FadeOut value

Time

●[F5]-[SF3], [SF4], [SF5] Normal Common LFO Destination 1, 2, 3

From this display you can select the destination parameter for the LFO (which aspect of the sound the LFO controls), the elements to be affected by the LFO, and the LFO Depth. Three Destinations can be assigned, and you can choose from several parameters per Destination.

• ElemSw (Element Switch)

Determines whether or not each element is to be affected by the LFO. The element number (1- 4) is shown when the LFO is enabled; a dash (-) indicates the LFO is disabled for that element.

• Dest (Destination)

Determines the parameters which are to be controlled (modulated) by the LFO Wave.

❏ Settings AMD, PMD, FMD, RESO (Resonance), PAN, ELFOSpd (Element LFO Speed)

• Depth

Determines the LFO Wave Depth.

❏ Settings 0 ~ 127

136MOTIF Reference