Yamaha MOTIF6, MOTIF7, MOTIF8, Music Production Synthesizer •Pan, • Bank, • Type, • Hold, • Voice, • Voume, •Switch, • PartSwitch, • Velocity Limit, ●[F3] Song Record Arpeggio, • InsEF (Insertion Effect Part Switch)

• Voice

Determines the voice for the selected track.

You can use the BANK, GROUP, NUMBER button or the Category Search function to select a voice (page 124). You can also select a Sample voice (page 58).

• Voume

Determines sound volume for the selected track.

❏ Settings 0~127

•Pan

Determines the stereo pan position the selected track. ❏ Settings L63 (Left) ~ C (Center) ~ R63 (Right)

• InsEF (Insertion Effect Part Switch)

Determines whether the Insertion effect (page 39) for the selected track is on or off.

❏ Settings on, off

●[F3] Song Record Arpeggio

From this display you can set various Arpeggio- related parameters for the selected track.

Determines whether Arpeggio playback data is recorded to the track or not. (Press the [F4] button.)

• Bank

Determines the specific Arpeggio Bank. For details, see page 55.

❏ Settings pre1, pre2, user

• Type

Determines the Arpeggio type. The two-letter prefix before the name indicates the general Arpeggio category. (page 55 )

• Velocity Limit

Determines the lowest and highest velocity in the Arpeggio’s velocity range. While recording, this lets you control when the Arpeggio sounds by your playing strength.

❏ Settings 1~127

•Switch

Determines whether Arpeggio playback is on or off. You can also turn this on or off from the front panel with the [ARPEGGIO ON/OFF] button.

❏ Settings off, on

• Hold

Determines whether the Arpeggio playback is “held” or not. When this is set to “on,” the Arpeggio cycles automatically, even if notes are released, and it continues to cycle until the next note data is received.

❏ Settings sync-off, off, on

• PartSwitch

Determines whether Arpeggio playback is on or off for the tone generator part (page 55) that corresponds to the recorded track.

❏ Settings off, on

Song Edit mode

Song Edit mode

This mode gives you comprehensive, detailed controls for editing the MIDI events of individual song tracks. MIDI events are messages (such as note on/off, note number, program change number, etc.) that make up the data of a recorded song.

◆Basic Procedure

1Basic Operation (page 70) In the Song Play mode, select a User Song to be edited.

2 Press the [EDIT] button to enter the Song Edit mode. (The indicator lights.) The Song event List display shown below appears.

EDIT

		Events
		Clock
Measure
number	Beat	(480 clocks per quarter-note)
3 Revise, insert or delete the MIDI events as needed.			mode
			Song
If you find the display too cluttered, you can filter
out certain event types with the View Filter.			Reference

Simply press the [F2] button and select the event types you want to be displayed.

4 After completing editing, press the [SONG] button to return back to the Song Play mode.

5 Press the [F] button to hear your edited data.

6 Edit other tracks as required. Repeat steps #2 through #5 as desired.

7 After editing, save your song data to the Memory Card or the SCSI device connected to the MOTIF in the File mode.

•For detailed instructions on step #3, see the following explanations.

•For details on step #7, refer to “File mode” on page 266.

MOTIF Reference 189