●[F1]-08 Fade In/Out

This Job lets you create fade-ins and fade-outs for the sample.

Set the Waveform and Key Bank containing the esired sample.

Press the [ENTER] button to execute the Job.

Sampling Job mode

●[F1]-09 Convert Freq

This Job lets you halve the sampling frequency of the specified sample. This can be used to convert hi-

fisamples to a lo-fi sound, and reduce the sample size by half to conserve memory.

Set the Waveform and Key Bank containing the sample to be converted.

Press the [ENTER] button to execute the Job.

Press the [F5] (CANCEL) button to cancel the operation.

Press the [F6] (OK) button to assign the edited sample to the specified Key Bank.

Press the [ENTER] button to execute the operation. If you re not satisfied with the results, change the Type and Length values and press the [ENTER] button again. This automatically reverts back to the original settings and executes the operation again with the new settings.

• Type

Determines the type of level fade: fade-in or fade-out. ❏ Settings in (fade-in), out (fade-out)

• Length

Determines the length of the fade-in or fade-out. When a fade-in is selected, this parameter specifies the length of the fade starting at the specified Start point. When a fade-out is selected, this parameter specifies the length of the fade starting at the beginning of the fade and ending at the specified End point.

❏ Settings 0000000~End point

Fade In

Length

Start point

Fade Out

Length

End point

Press the [F5] (CANCEL) button to cancel the operation.

Press the [F6] (OK) button to assign the converted sample to the specified Key Bank.

Press the [ENTER] button to execute the operation.

If you re not satisfied with the results, change the Type and Length values and press the [ENTER] button again. This automatically reverts back to the original settings and executes the operation again with the new settings.

●[F1]-10 Stereo to Mono

This Job lets you convert a stereo sample to a mono sample.

Set the Waveform and Key Bank containing the sample to be converted.

 

mode

Press the [ENTER]

Sampling

 

button to

 

execute the Job.

 

 

Reference

Press the [F5] (CANCEL) button to cancel the operation.

Press the [F6] (OK) button to assign the converted sample to the specified Key Bank.

Press the [ENTER] button to execute the operation.

If you’re not satisfied with the results, change the Type value and press the [ENTER] button again. This automatically reverts back to the original settings and executes the operation again with the new settings.

MOTIF Reference 245