Display-based Controls

3 Move the cursor to the next position of the name by using the Cursor button.

DEC/NOINC/YES

Operation Basic

EXIT

ENTER

EXECUTE

4 Enter the other characters as desired by repeating steps #1 - #3 above.

Using the Character List

In steps #2 and #3 above, you can use the special Character List, which shows you all the available characters, and makes it easier to select the characters.

Press and hold down the [INFORMATION] button to display the pop-up Character List. To select a character from the list, keep holding down the [INFORMATION] button and use the [INC/YES] and [DEC/NO] buttons or data dial.

When the cursor is located at the Name, this [LIST] icon appears and you can call up the Character List display by holding the [INFORMATION] button. Release the [INFORMATION] button to return back to the original display.

INSERTION

INFORMATION

1Move the cursor to the desired position.

While holding the [INFORMATION] button....

2Select a character by using the [INC/YES] button, [DEC/NO] button or the data dial.

DEC/NOINC/YES

EXIT

ENTER

EXECUTE

76 MOTIF Basic Operation