Yamaha MOTIF6, MOTIF7, MOTIF8, Music Production Synthesizer Effect connection, ●In the Voice mode:, ●In the Performance mode:

System Overview

Effect connection●In the Voice mode:

Reference (page 137)

Structure Basic

You can select the Insertion connection among three types.

					System Effect
Tone Generator
						Reverb
block
						Chorus
Element 1	Insertion Effect			Send Level			Return Level
Element 2
		1						Master Equalizer		Output
Element 3
		2
Element 4						You can select the Insertion connection
						from the three types shown below.
This determines which Insertion			1 to 2				2 to 1		parallel
system, 1 or 2, is applied to each
Element (or to each key when the
Drum voice is selected). The			1				1		1
Insertion effect can also be
bypassed.			2				2		2

nThe parallel connection is not available for Plug-in voices.

●In the Performance mode:

Reference (page 169)

The diagram below indicates the connection when the Vocal Harmony Plug-in Board (PLG100-VH) is installed to slot 1.

Select the part to which the Insertion effect is applied from parts 1-4 and Plug-in parts 2-3. The connection type depends on the setting of the Voice assigned to the selected part.

	Insertion Effect
Tone Generator
block		1
Part 1-4,
		2
Plug-in part 2-3

System Effect

Reverb

Chorus

Variation

Send Level Return Level

Master Equalizer Output

Insertion Effect

(Plug-in)

Select the part to which the Plug-in Insertion effect is applied from parts 1-4, Plug-in parts 2-3 and A/D Input part.

A/D Input

•External audio source

•Microphone sound

nThe Vocal Harmony Plug-in Board (PLG100-VH) can be installed only to slot 1. It cannot be installed to slot 2 or 3.

40 MOTIF Basic Structure