Yamaha MOTIF6, MOTIF7, MOTIF8, Music Production Synthesizer • Note, • GlideTime, • Transpose, • Roll Step, ●[F2]-06 Glide, • Velocity Range, ●[F2]-04 Crescendo, ●[F2]-05 Transpose, ●[F2]-07 Create Roll

Song Job mode

●[F2]-04 Crescendo

This Job lets you create a crescendo or decrescendo over the speciﬁed range of notes. (Crescendo is a gradual increase in volume, and decrescendo is a gradual decrease.)

TrackRange

• Velocity Range

Determines the intensity of the crescendo or decrescendo. The velocity values of the notes in the speciﬁed range are gradually increased or decreased starting at the ﬁrst note in the range. The velocity of the last note in the range becomes the original velocity of the note plus the Velocity Range value. If the resultant velocity is outside the 1 ~ 127 range it is set to 1 or 127 accordingly. Settings greater than 0 produce a crescendo, and settings less than 0 produce a decrescendo. A setting of 0 produces no effect.

❏ Settings -127 ~ +127

●[F2]-06 Glide

The Glide Job replaces all notes following the ﬁrst note in the speciﬁed range with pitch bend data, producing smooth glides from note to note. This is ideal for producing guitar-like slide or note-bending effects.

TrackRange

• GlideTime

Determines the length of the glide. Higher values produce a longer glide between notes.

❏ Settings 000~100

•PB Range (Pitch Bend Range)

Determines the maximum pitch bend range to be applied by the glide job (in semitones).

❏ Settings 01~24

●[F2]-05 Transpose

Transpose lets you change the key or pitch of the notes in the speciﬁed range.

TrackRange

Reference	• Note
Song	• Note
Song	Determines the range of note pitches over which the job is
	Determines the range of note pitches over which the job is
mode	applied.You can set this parameter by pressing the desired
mode	key while holding the [INFORMATION] button.
	key while holding the [INFORMATION] button.
	❏ Settings	C-2 ~ G8
	• Transpose
	Transposes notes in the speciﬁed range (in semitones). A
	setting of +12 transposes up one octave, while a setting of
	-12 transposes down an octave. A setting of 0 produces no
	change.
	❏ Settings	-127 ~ +127

●[F2]-07 Create Roll

This Job creates a series of repeated notes (like a drum roll) in the speciﬁed range with the speciﬁed continuous changes in clock step and velocity. This is ideal for creating fast staccato rolls and special stuttering effects.

TrackRange

Roll Step

Roll Velocity

• Roll Step

Determines the size of the step (i.e. the number of clocks) between each note in the roll. Both the starting and ending clock values can be speciﬁed, making it easy to create rolls in which the step size varies from note to note.

❏ Settings Start Step 001~999 End Step 001~999

196MOTIF Reference