●[F6]-[SF1] Normal Common Effect Connection

This display gives you comprehensive control over the effects.

• EL: OUT 1-4 (Element 1-4 Effect Output)

Determines which Insertion effect (1 or 2) is used to process each individual element. The “thru” setting lets you bypass the Insertion effects for the specific element. (This parameter is the same as “InsEFOut” in Normal Element below. Making a setting here automatically changes the setting of that parameter as well.)

❏ Settings ins1, ins2, thru

• InsConnect (Insertion Effect Connect)

Determines the effect routing for Insertion effects 1 and 2. The setting changes are shown on the diagram in the display, giving you a clear picture of how the signal is routed.

❏ Settings parallel, 1 to 2, 2 to 1

• Ins1Category, Ins1Type

Determines the effect type for Insertion 1.

❏ Settings Refer to the Effect Types list in the separate Data List booklet.

• Ins2Category, Ins2Type

Determines the effect type for Insertion 2.

❏ Settings Refer to the Effect Types list in the separate Data List booklet.

• RevType (Reverb Effect Type)

Determines the effect type for Reverb.

❏ Settings Refer to the Effect Types list in the separate Data List booklet.

• ChoType (Chorus Effect Type) Determines the effect type for Chorus.

❏ Settings Refer to the Effect Types list in the separate Data List booklet.

• RevSend (Reverb Send)

Determines the level of the sound (from Insertion 1 or 2, or the bypassed signal) that is sent to Reverb effect. A setting of “0” results in no Reverb processing of the sound.

❏ Settings 0 ~ 127

• ChoSend (Chorus Send)

Determines the level of the sound (from Insertion 1 or 2, or the bypassed signal) that is sent to Chorus effect. A setting of “0” results in no Chorus processing of the sound.

❏ Settings 0 ~ 127

• RevRtn (Reverb Return Level)

Determines the Return level of the Reverb Effect. ❏ Settings 0 ~ 127

Voice Edit mode

• ChoRtn (Chorus Return Level)

Determines the Return level of the Chorus Effect. ❏ Settings 0 ~ 127

• ChoToRev (Chorus to Reverb)

Determines the Send level of the signal sent from the Chorus Effect to the Reverb Effect.

❏ Settings 0 ~ 127

• RevPan (Reverb Pan)

Determines the pan position setting for the Reverb effect. ❏ Settings L63 (far left)~cnt (center)~R63 (far right)

• ChoPan (Chorus Pan)

Determines the pan position setting for the Chorus effect. ❏ Settings L63 (far left)~cnt (center)~R63 (far right)

●[F6]-[SF2], [SF3], [SF4], [SF5] Normal Common Effect Parameter Insertion 1, 2, Reverb, Chorus

The number of parameters and values available differs depending on the currently selected effect type. For more information, see the Effect Type List in the separate Data List booklet.

■ Element Edit

mode

 

For instructions on selecting and editing individual

Voice

elements, refer to step #4 in the Basic Procedure on

page 124.

Reference

Basic Structure (page 44)

● [F1]-[SF1] Normal Element Oscillator Wave

 

From this display you can select the desired wave or

 

sound used for the element.

 

• ElementSw (Element Switch)

Determines whether the currently selected element is on or off.

❏ Settings

off (inactive), on (active)

• Bank

This determines the specific bank of waves, from which you can select the desired sound. The Preset bank features the factory programmed waves; the User bank contains any audio data you have created with the Sampling function (page 58).

❏ Settings preset, usr wav

•Wave No. (Wave Number), WaveCtgry (Wave Category)

❏ Settings See the Wave list of the separate Data List.

MOTIF Reference 137