Utility mode

●[F1]-[SF3] General Effect Bypass

From this display you can select the specific effect(s) to be bypassed when the [EFFECT BYPASS] button (page 13) is turned on.

EFFECTBYPASS

INSERTION SYSTEM

❏ Settings on (bypassed), off

●[F1]-[SF4] General Other

￿￿￿￿￿￿ ￿￿￿ ￿￿￿￿￿￿ ￿￿￿￿￿ ￿￿￿￿￿￿￿￿ ￿￿￿ ￿￿￿￿￿ ￿￿ ￿￿

￿￿￿￿￿￿￿￿￿￿￿ ￿￿￿￿ ￿￿ ￿￿￿￿￿￿￿￿ ￿￿￿ ￿￿￿￿￿ ￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿ ￿￿￿￿￿ ￿￿￿￿￿￿ ￿￿ ￿￿￿￿￿￿￿￿ ￿￿￿ !￿￿￿

￿￿￿￿￿￿￿￿ ￿￿￿￿￿￿￿￿ ￿￿￿￿￿￿"￿￿￿￿￿￿ ￿￿￿ ￿￿￿￿ ￿￿￿￿￿￿￿￿

nFor details, see page 264.

•Auto Load

Determines whether the Auto Load function is on or off. When this is on, the MOTIF will automatically load the specified files (from memory card or SCSI storage device) to User memory — whenever the power is turned on. (See above illustration for additional explanations.)

❏ Settings on, off

• Auto DemoLoad

The MOTIF features special Demo song data, which is stored to ROM and should be loaded to DRAM for proper operation (page 64). When this parameter is set to “on,” the Demo song data is automatically loaded when the power os turned on. This parameter determines whether the Demo song data is automatically loaded (on) or not (off) when turning the power on.

Reference

❏ Settings

on, off

n When Auto Load is set to on, the Auto Demo Load

 

 

parameter cannot be set.

Utility

If this parameter is set to on, all User Voice, Performance,

mode

Master, and System settings will be initialized to the

Factory settings when switching the power on the next

 

 

time. Important data should always be backed up to a

 

separate Memory Card or some other storage device.

 

• PowerOnMode

 

This determines the default power-on mode (and memory

 

bank) for the MOTIF — letting you select which condition

 

is automatically called up when you turn the power on.

 

❏ Settings

See below.

Performance

When you switch the MOTIF on, the Performance Play mode is entered and the first program number (USER: 001) is selected automatically.

Voice (User)

When you switch the MOTIF on, the Voice Play mode is entered and the first program number of the User Voices (USER: 001) is selected automatically.

Voice (PRE1)

When you switch the MOTIF on, the Voice Play mode is entered and the first program number of the Preset Voices (PRE 1: 001) is selected automatically.

GM

When you switch the MOTIF on, the Voice Play mode is entered and the first program number of the GM Voices (GM: 001) is selected automatically.

last

When you switch the MOTIF on, the Voice/Performance Program Number selected before you switched the power off is recalled.

Master

When you switch the MOTIF on, the Master Play mode is entered and the first program number (001) is selected automatically.

• CtrlReset (Controller Reset)

Determines the status of the controllers (Modulation Wheel, Aftertouch, Knobs, etc.) when switching between voices. When this is set to “off,” the controllers are kept at the current setting. When this is set to “on,” the controllers are reset to the default states (below).

❏ Settings on, off

If you select “on,” the controllers will be reset to the following states/positions:

Pitch Bend

Center

Modulation Wheel

Minimum

Aftertouch

Minimum

Foot Controller

Maximum

Breath Controller

Maximum

Foot Switch

Off

Expression

Maximum

Foot Volume

Maximum

Sustain

Off

[F2] Interface settings●[F2]-[SF1] I/O Input

From this display you can set parameters related to audio input.

• A/DSource

The MOTIF features two different input connections for transferring analog audio from an external device: the A/ D INPUT jacks or the mLAN terminal (when an optional mLAN8E is installed). One or the other must be set; the two cannot be used at the same time.

❏ Settings analog (A/D INPUT jack), mLAN

252MOTIF Reference