Song Job mode

The Song Job mode contains a comprehensive set of editing tools and functions you can use to change the sound of the song. It also includes a variety of convenient operations, such as copying or erasing data. Most of these operations can be performed on either an entire track or a selected range of measures in the track.

◆Basic Procedure

1 In the Song Play mode, select a song you wish to execute the Job on.

2 Press the [JOB] button to enter Song Job Mode.

3 Select the desired Job menu by pressing the appropriate button, [F2] - [F6].

4 Use the CURSOR buttons to scroll to the desired Job.

5 Press the [ENTER] button to go to the selected Job display.

6 Set the relevant Job parameters.

7 Press the [ENTER] button. (The display prompts you for confirmation.)

8 Press the [INC/YES] button to execute the Job. After the Job has been completed, a “Completed” message appears and operation returns to the original display.

nTo cancel the Job, press the [DEC/NO] button.

9 If you wish to undo the changes made in the steps above, press the [F1] button and (to select Undo/ Redo) and use the Undo function.

Song Job mode

10Press the [SONG] button to exit from Song Job mode and return to Song Play mode.

•For detailed instructions on steps #3 - #9, see the explanations below.

[F1] Undo/Redo

The explanations here apply to step #9 of the Basic Procedure (see above).

The Undo Job cancels the changes you made in your most recent patch session, recording session, editing session, or Job, restoring the data to its previous state. This allows you to recover from accidental data loss. Redo is available only after using Undo, and lets you restore the changes you made before undoing them.

Indicates the current Job: Undo or Redo.

Indicates the operation to be

Press the [ENTER] button to

affected by Undo or Redo.

execute the Undo/Redo

 

operation.

Undo/Redo does not work with sample voice operations.

[F2] Note data Job

mode

 

Press the [F2] button in steps #3 of the Basic Procedure

Song

 

(see above). so that the Note data Job list appears on

Reference

the display. Scroll the cursor to the desired Job and

 

press the [ENTER] button to go to the display of the

 

selected Job.

 

The following explanations apply to step #6 of the Basic Procedure (see above).

nBefore executing the Note data Job, make sure that you specify the track (01~16, all) and range (measure : beat : clock) to which the Job is applied.

MOTIF Reference 193