• Mic/Line

When using the A/D INPUT jacks, this determines the input source, microphone (mic) or line.

❏ Settings mic, line

• Digital

When the optional AIEB2 board is installed, the MOTIF features two different input connections for transferring digital audio from an external device: coaxial or optical.

One or the other must be set; the two cannot be used at the same time.

❏ Settings

coaxial, optical

●[F2]-[SF2] I/O Output

From this display you can set parameters related to audio output.

Specify the digital output resolution of the optionally installed AIEB2 board (page 19). ❒ Settings 20bit, 24bit

Utility mode

To initialize all the mLAN settings above, use the following procedure.

[EXIT] button

 

 

[SF5] button

 

 

 

 

 

Press the [ENTER] button to actually initialize the mLAN settings.

Set the output gain of each jack.

❒Settings 0dB, +6dB, +12dB, +18dB

nThe digital output resolution of the MOTIF itself is set to 16 bit (fixed).

●[F2]-[SF3] I/O mLAN connection

From this display you can set parameters related to connection of an optional mLAN8E (page 18). The following display is available only when the optional mLAN8E has been installed.

[F3] Voice settings

These special voice-related settings are available only when entering the Utility mode from the Voice mode.

●[F3]-[SF1] Voice Master Equalizer

From this display you can apply five-band equalization to all parts of the selected voice.

For details on this parameter,

 

 

refer to the owner’s manual of

Vendor Name

Nickname

the mLAN8E.

 

 

Gain

Q (Frequency Characteristic)

[EXIT] button

[SF4] button

Assign a nickname for the connection. For specific instructions on naming, see Basic Operation on page 75. For details about the Nickname parameter, refer to

the owner’s manual of the mLAN8E.

Set the Word Clock. For

Press the [ENTER] button to

details, refer to the owner’s

actually set the value.

manual of the mLAN8E.

 

nAll mLAN8E-related settings in the Utility mode are stored only to the memory on the mLAN8E itself, and not to the User memory of the MOTIF.

0

Freq

(Frequency)

• Shape

mode

Determines whether the equalizer type used is Shelving or

Peaking. The Peaking type attenuates/boosts the signal at

Utility

the specified Frequency setting, whereas the Shelving type

attenuates/boosts the signal at frequencies above or below

Reference

the specified Frequency setting.

 

❏ Settings shelv (Shelving), peak (Peaking)

 

n For details about the shapes of the Shelving and

 

Peaking types, see page 168.

 

MOTIF Reference 253