Sampling Job mode

• Type

Determines which channel, or both channels, of the stereo sample will be converted to a mono sample.

❏Settings L+R>mono

The left and right channels of the stereo sample are mixed and converted to a mono sample.

L>mono

The left channel of the stereo sample is converted to a mono sample.

R>mono

The right channel of the stereo sample is converted to a mono sample.

●[F1]-11 Loop-Remix

This Job lets you automatically cut the sample into separate “slices” and randomly rearrange the slices for special effects and unusual rhythmic variations. A variety of audio transform operations are also included for even greater changes in the sound.

Set the Waveform and Key Bank containing the sample to be Loop-remixed.

Press the [ENTER] button to execute the Job.

 

Press the [F5] (CANCEL) button to

 

 

 

 

 

 

 

cancel the operation.

 

 

 

Press the [F6] (OK) button to assign the

 

 

Loop-remixed sample to the specified Key Bank.

 

 

 

Press the [ENTER] button to execute the operation.

Reference

If you re not satisfied with the results, change the Type

 

 

and Variation values and press the [ENTER] button again.

 

This automatically reverts back to the original settings and

 

executes the operation again with the new settings.

Sampling

• Type

Determines the degree to which the looped portion of the

sample will be sliced.

❏ Settings 1~4

mode

• Variation

 

 

Determines how the original sample is varied by the this

 

Job.

 

❏ Settings

 

normal1, 2

 

These settings slice and rearrange the sample data,

 

without performing any other audio changes.

 

reverse1, 2

 

In addition to slicing and rearranging, these settings

 

reverse the playback of some of the slices.

●[F1]-12 Slice

This Job lets you divide the sample into separate “slices,” the number of which is determined by the note length (with Measure, Meter, and SubDivide). When entering this Job from the Song/Pattern mode, note data for playing the slices in sequence is also created. (Keep in mind that the results of this Job vary depending on the previously selected mode: Voice/Performance or Song/Pattern.)

Set the Waveform and Key Bank containing the sample to be sliced.

Press the [ENTER] button to execute the Job.

Press the [F5] (CANCEL) button to cancel the operation.

Press the [F6] (OK) button to assign the sliced sample to the specified Key Bank.

Press the [ENTER] button to execute the operation. If you re not satisfied with the results, edit the various parameters and press the [ENTER] button again. This automatically reverts back to the original settings and executes the operation again with the new settings.

With the exception of the parameter below, all parameters and settings are the same as in the Slice display of the Sampling Record mode (page 238).

• Lowest Key

Specifies the lowest key number from which the sliced samples are ordered.

❏ Settings C - 2 ~G8

nIn the Slice display of the Sampling Record mode (page 238), this parameter is fixed to “C-1” for the MOTIF6, “E0” for the MOTIF7, “A-1” for the MOTIF8, and cannot be set.

246MOTIF Reference