Master Edit mode

• TransmitCh (Transmit Channel)

Determines the MIDI Transmit Channel for each zone.

❏ Settings 1~16

•TGSwitch (Tone Generator Switch)

Determines whether or not to transmit MIDI messages for each zone to each Part’s tone generator block.

❏ Settings on, off

• MIDISwitch

Determines whether or not to transmit MIDI messages for each zone to an external MIDI device via the MIDI or USB terminal.

❏ Settings on, off

●[F2] Zone Note

From this display you can set the pitch- and keyboard-related parameters for each zone — allowing you to set up zone splits and determine the pitch range for each zone.

• Octave

Determines the amount in octaves by which the range of the zone is shifted up or down.

❏ Settings -3~0 (Default)~+3

• Transpose

Determines the amount in semitones by by which the range of the zone is shifted up or down.

❏ Settings -11 ~ 0 (Default) ~ +11

• NoteLimit H, L (High, Low)

Determines the lowest and highest notes of the range for each zone. The selected zone will sound only when you play notes within this range.

❏ Settings C -2 ~G8

nYou can also set the range directly from the keyboard, by holding down the [INFORMATION] button and pressing the desired low and high keys.

●[F3] Zone Transmit Switch

 

From this display you can set how the playing of

 

each individual zone affects transmission of various

 

MIDI data, such as Control Change and Program

Reference

Change messages. When the relevant parameter is

Note that two different display types are provided

 

set to “on,” playing the selected zone will transmit

 

the corresponding MIDI data.

Master

(see below). Each display type features the same

settings in a different format; use the type you feel

 

mode

most comfortable with.

 

• This display type shows the Transmit Switch status for all of the zones.

Set the desired zone on or off, for the corresponding MIDI data type. Keep in mind that since all the available parameters cannot be simultaneously displayed, you will need to use the cursor controls to scroll the display in order to see and set the other parameters.

• This display type shows all of the Transmit Switch settings for a single selected zone.

Set the desired MIDI data type on or off for the selected zone. To select other zone, use the NUMBER [1] - [4] buttons (making sure that the [TRACK SELECT] button is on).

[SF5] button

 

 

[SF5] button

 

 

 

 

 

 

 

●[F4] Zone Preset

From this display you can make the voice-related settings for each zone, in the selected Master program number. In this way, selecting a different Master automatically calls up a completely different set of voices and voice-related setttings for the four zones.

• BankMSB, BankLSB, PgmChange (Program Change)

Determines the voice assignment for each zone in the selected Master.

❏ Settings Refer to the Voice List in the separate Data List booklet.

• Volume

Determines the output level of each zone.

❏ Settings 0~127

•Pan

Determines the stereo pan position of each zone.

❏ Settings L64 (Left) ~ C (Center) ~ R63 (Right)

272MOTIF Reference