Yamaha MOTIF6, MOTIF7, MOTIF8, Music Production Synthesizer ●Control Number settings, 6Call up the NOTE display, 5Call up the TRANS display, 7Store the settings to a Master (page 94)

Using as a Master Keyboard

4Call up the display for Zone editing.

Press any of the buttons.

1 2 3 4

MODE

BANK

SEQUENCER

GROUP

NUMBER

7Store the settings to a Master (page 94).

5Call up the TRANS display.

1Set the TG Switch of Zone 1 to on and set those for all other Zones to off. This is for transmitting the data played only in the Zone 1 to the built-in tone generator.

2Set the MIDI Switch of the Zone 2 and 3 to on and set the ones of the other Zones to off. This is for transmitting the data

played in the Zone 2 and 3 to the external tone generator.

3Set the MIDI transmit channel of Zone 1 to 1. Set the MIDI transmit channel of Zone 2 and 3 to match the Receive channel of the external tone generator (slave).

4Make sure the external tone generator is set to multi-timbral operation (different voices for each of the 16 MIDI channels), and select the appropriate voices on the tone generator, corresponding to the MIDI channels you set in 3 above.

SF 1SF 2SF 3SF 4SF 5

F1 F2 F3 F5 F6

SF 1SF 2SF 3SF 4SF 5

F1 F2 F3 F5 F6

Guide Start Quick

6Call up the NOTE display.

1Set the Note Limit H (High) of Zone 1 to B2. Set the Note Limit L (Low) of Zone 1 to C-2.

2Set the Note Limit H (High) of Zone 2 and 3 to G8. Set the Note Limit L (Low) of Zone 2 and 3 to C3.

Each Zone will sound the assigned voice within the note range set above.

●Control Number settings

Here in the KN/CS display of the Master Edit mode, you can set how the Control knobs and sliders will affect each Zone. This lets you specify a MIDI Control Change number for each knob and slider. In the example below, the Control knobs for all Zones have been set to 10 (Pan), and the sliders have been set to 11 (Expression). In this way, you can control the stereo position of each Zone with the appropriate knob, and use the sliders to adjust the relative volume balance among the Zones.

This setting is available only when the Zone Switch is set to on from the Memory display in the Master Play mode.

CUTOFF	RESONANCE	ATTACK	RELEASE
ASSIGN A	ASSIGN B	ASSIGN 1	ASSIGN 2
KN 1	KN 2	KN 3	KN 4
MEQ LOW	MEQLOWMID MEQ HI MID		MEQ HIGH

SF1	SF 2	SF 3		SF 4	SF5
F1	F2	F3	F4	F5	F6

96 MOTIF Quick Start Guide