[F2] Waveform Job

Press the [F2] button in step #3 of the Basic Procedure on page 240 so that the Waveform Job list appears on the display. Scroll the cursor to the desired Job and press the [ENTER] button to go to the display of the selected Job.

Sampling Job mode

• Octave

Determines the amount in octaves by which the Key Bank is transposed. When you want to transpose by less than one octave, set this to “0” and use the Note parameter below.

❏ Settings -3~ 0 ~+3

• Note

Determines the amount in semitones by which the Key Bank is transposed. When you want to transpose by exact octaves, set this to “0” and use the Octave parameter above.

❏ Settings -11~ 0 ~+11

●[F2]-01 Copy

This Job lets you copy the data of one waveform to another.

Select the source waveform.

Select the destination waveform.

●[F2]-02 Delete

This Job lets you delete a specific waveform from memory.

Select the waveform to be deleted.

●[F2]-03 Transpose

This Job lets you transpose the Key bank setting of a specified waveform.

Select the desired waveform for which the

Key Bank setting is to be transposed.

●[F2]-04 Name

This Job lets you assign a name to the selected waveform.

Select a waveform to be named.

For specific instructions on naming, see “Basic Operation” on page 75.

[F3] Other Jobs

Press the [F3] button in step #3 of the Basic Procedure on page 240 so that the following Job list appears on the display. Scroll the cursor to the desired Job and press the [ENTER] button to go to the display of the selected Job.

● [F3]-01 Clean Up Memory

Sampling mode

Reference

This Job deletes all the waveforms to which User

 

voices or Sample voices are not assigned.

 

MOTIF Reference 247