Yamaha MOTIF6, MOTIF7, MOTIF8, Music Production Synthesizer • Rate, • Rate, • Offset, • Set All, • Event Type, • Event Type, Modified value, Rate) + Offset, • Number Of Times, ●[F3]-06 Thin Out, = (original value

Song Job mode

• Number Of Times

Determines the number of times the data creation is to be repeated.

For example, if data is created in the range M001:1:000 ~ M003:1:000 and this parameter is set to 03, the same data will be created at M003:1:000 ~ M005:1:000 and M005:1:000 ~ M007:1:000.

This Job lets you to insert continuous volume or filter cutoff variations to create tremolo or wow effects.

❏Settings 01~99

●[F3]-06 Thin Out

This Job thins out the specified type of continuous data in the specified range — allowing you to free up memory space for other data or further recording.

TrackRange

• Event Type

Determines the event type to be thinned.

❏ Settings PB (Pitch Bend), CC: 000-127, all (Control

	Change, Control Change number), CAT
	(Channel Aftertouch), PAT (Polyphonic
	Aftertouch)
	n The Thin Out Job will not work on continuous
	data that has a clock interval of greater than 60
	clocks per event.
Reference	This Job lets you change the values of a specified
	● [F3]-07 Modify Control Data
Song	type of control change data — pitch bend, control
	change, aftertouch, etc. — in the specified range.
mode	Data changes are calculated as follows:
	Modified value
	= (original value x	Rate) + Offset.
	The modified value cannot exceed the minimum/
	maximum limits of the parameter. Any result lower
	than the minimum is set to the minimum; any result
	higher than the maximum is set to the maximum.
	Track	Range

• Event Type

Determines the event type to be modified.

❏ Settings PB (Pitch Bend), CC: 000-127, all (Control Change, Control Change number), CAT (Channel Aftertouch), PAT (Polyphonic Aftertouch), tmp (Tempo)

• Set All

Sets all target events to the same fixed value. When set to “OFF” the Set All parameter has no effect. When set to a value other than “OFF” the Rate and Offset parameters are unavailable and appear as “***” on the display.

❏ Settings OFF, 000 ~127 (-8192 ~ +8191 for pitch bend, 0.1 ~ 300.0 for tempo)

• Rate

Determines the percentage by which the target events will be shifted from their original values.

When the Set All parameter is not “OFF” this parameter appears as “***” and cannot be changed.

❏ Settings 000% ~ 200%, ***

• Offset

Adds a fixed value to the Rate-adjusted event values. When the Set All parameter is not “OFF” this parameter appears as “***” and cannot be changed.

❏ Settings -127~127, *** (-8192 ~ +8191 for pitch bend, ***)

●[F3]-08 Beat Stretch

This Job performs time-expansion or compression over the selected range.

Keep in mind that this operation affects all event timing, note step times, and note gate times.

TrackRange

• Rate

Determines the amount of time expansion or compression as a percentage.

Settings higher than 100% produce expansion, and settings below 100% produce compression.

❏Settings 025%~400%

nOnly MIDI data is affected by this job. Sample voices are not expanded or compressed. However, for samples recorded using the Slice+Seq feature, the Beat Stretch job expands or compresses the timing of the note data, step times, and gate times that control playback of the sliced samples. The sample voice itself is not affected.

200MOTIF Reference