Yamaha MOTIF6, MOTIF7, MOTIF8, Music Production Synthesizer • Clock, • Curve, • Event Type, • Event Type, • Event Type, • Data Range, •Destination track, ●[F3]-03 Erase Event, ●[F3]-04 Extract Event

●[F3]-03 Erase Event

This Job clears all specified events from the specified range, effectively producing a segment of silence.

TrackRange

• Event Type

Determines the event type to be erased.

All events are cleared when ALL is selected.

Individual control change numbers can be specified when erasing control change events.

❏Settings

When TR is set to 01~16:

Note (Note events), PC (Program Change), PB (Pitch Bend), CC: 000-127, all (Control Change, Control Change number), CAT (Channel Aftertouch), PAT (Polyphonic Aftertouch), EXC (System Exclusive), All (all events)

When TR is set to “tmp” (Tempo): tmp (tempo)

When TR is set to “scn” (Scene):

Scene Memory (Scene change information), Track Mute (Track mute setting change information)

nKeep in mind that applying this Job to a track with sample voices erases the events that trigger the samples, but it does not erase the actual samples themselves.

●[F3]-04 Extract Event

This Job moves all instances of specified event data from a specified range of a track to the same range in a different track.

One useful application for this would be to extract all instances of a certain note out of a track, and send them to a new track for separate editing.

Track and range in which data is extracted

Destination track

• Track and range in which data is extracted

❏ Settings Track 01~16

Range 001:1:000~999:16:479

• Event Type

Selects the event type to be extracted.

Specific note and control change numbers can also be specified as required.

Song Job mode

❏ Settings Note (Note : Note number), PC (Program Change), PB (Pitch Bend), CC: 000-127, all (Control Change, Control Change number), CAT (Channel Aftertouch), PAT (Polyphonic Aftertouch), EXC (System Exclusive)

•Destination track

❏ Settings 01~16

●[F3]-05 Create Continuous Data

This Job creates continuous pitch bend or control change data over the specified range.

TrackRange

• Event Type

Determines the event type to be created.

❏ Settings PB (Pitch Bend), CC: 000-127, all (Control Change, Control Change number), CAT (Channel Aftertouch), EXC (System Exclusive), tmp (Tempo)

• Data Range

Determines the lower and upper limits for the data range
to be created. The left value is the lower limit, and the
right value is the upper limit.
❏ Settings	When Event Type is set to PB
	-8192~+8191	mode
	When Event Type is set to tmp:1.0~300.0
	When Event Type is set to other :0~127	Song
• Clock
		Reference
Determines the number of clocks to be inserted between
each created event.
❏ Settings	001~999
• Curve
Determines the “curve” of the continuous data.
Refer to the graph below for approximate curve shapes.
❏ Settings	-16 ~+16
Curve=+16 Curve=0((linear) Curve=-16
Start	End point
point
	This distance specified
	by Clock

MOTIF Reference 199