Sampling Edit mode

BEAT1

: Original wave size X N + (0.3 X number of slices)

BEAT2

: Original wave size X N + (0.2 X number of slices)

BEAT3

: Original wave size X N + (0.3 X number of slices)

PHRASE1

: Original wave size X N + (5.8 X number of slices)

PHRASE2

: Original wave size X N + (1.4

X number of slices)

PHRASE3

: Original wave size X N + (0.4

X number of slices)

PHRASE4

: Original wave size X N + (1.4

X number of slices)

QUICK

: Original wave size X 3 + (0.7

X number of slices)

For monaural samples N = 5.5, and for stereo samples N = 8. Also, the number of slices is doubled for stereo samples.

With the memory expanded to the maximum 64 megabytes, for example, if the entire memory is empty and a 44.1 kHz sample is sliced to 32 slices, the longest possible sampling time will be

approximately:

BEAT1~3, PHRASE1~4: approx. 138 seconds

(mono), 47 seconds (stereo.) QUICK: approx. 253 seconds (mono), 126 seconds (stereo).

Sampling Edit mode

Basic Structure (page 59)

This mode gives you a variety of sample eding tools, with which you can change the samples you’ve recorded in the Sampling Record mode, and customize them for your applications as needed.

◆Editing Stereo Samples

For samples that have been recorded in stereo (with Stereo Sampling), both the left and right waves of the sample are edited together by the MOTIF. in the actual process, any edits made to the left channel wave are duplicated exactly in the right channel. The exception to this, of course, is Pan — since the sample already is in stereo.

Reference

◆ Basic Procedure

1 Press the [INTEGRATED SAMPLING] button to

Sampling

enter the Sampling mode. (The indicator lights.)

n Unlike in the Sampling Record mode, all

 

mode

parameters and functions of the Sampling Edit

mode are the same, no matter which mode was

previously selected.

 

n All Sampling Edit operations apply to the

 

Waveform (actual sample), not the voice.

 

2 Press the [EDIT] button to enter the Sampling Edit

 

mode. (The indicator lights.)

3 Select the desired sample for editing from the Key Bank display. (Press the [F1] button.)

4 Select the menu you wish to edit by pressing the [F2] - [F6] buttons.

5 Edit parameters for the selected sample.

6 Press the [EXIT] button to exit from the Sampling Edit mode.

•The operations corresponding to steps #3 - 4 are covered in the following explanations.

Sample selection and Audition function

The explanations here apply to step #3 of the Basic Procedure see above.

For details about the relationship between the parameters below, see page 241.

1

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

2

Indicates information about the

 

 

selected Key Bank.

 

 

You can hear the selected sample by pressing the [SF1] button. (Audition function)

1 Select a Waveform that contains a Sample you wish to edit. Move the cursor to the Waveform number and select the desired number by using the [INC/ YES] button, [DEC/NO] button, or the data dial.

2 To select the desired Key Bank, simultaneously hold down the [INFORMATION] button and press the appropriate key on the keyboard. The information about the selected Key Bank appears on the display and the sample assigned to the Key Bank is called up.

240MOTIF Reference