Sampling Job mode

3 Select the desired Job menu by pressing the appropriate button, [F1] - [F3].

4 Use the CURSOR buttons to scroll to the desired Job.

5 Press the [ENTER] button to go to the selected Job display.

6 Set the relevant Job parameters.

7 Press the [ENTER] button. (The display prompts you for confirmation.)

8 Press the [INC/YES] button to execute the Job. After the Job has been completed, a “Completed” message appears and operation returns to the original display.

nTo cancel the Job, press the [DEC/NO] button.

nThe actual procedures in steps #7 and #8 above may differ depending on the specific Job. Refer to the explanantions in each Job for details.

For Jobs that take longer to process, you will see the message “Executing…” during processing. If you switch off the power of the MOTIF while this message is displayed, you risk corrupting your data.

9 Press any other mode button to exit from the Sampling Job mode.

•For detailed instructions on steps #3 - #6, see the explanations below.

Reference

 

[F1] Key Bank Job

 

display. Scroll the cursor to the desired Job and press the

 

 

Press the [F1] button in step #3 of the Basic Procedure

 

 

see above, so that the Key Bank Job list appears on the

mode Sampling

 

[ENTER] button to go to the display of the selected Job.

 

 

ENTER

EXECUTE

◆Audition function and Key Bank (sample) selection

For the Key Bank Jobs that follow, the Audition function and Key Bank selection are the same as in the Sampling Edit mode (page 241). Here, you can call up and perform Jobs on the sample data assigned to the selected Key Bank. To audition the currently selected sample, press the [SF1] button (AUDITION).

Also, note that for Jobs 01 - 04, the Keyboard control (“KBD”) is available — letting you directly change the Key Bank from the keyboard. (Simultaneously hold down the [INFORMATION] button and press the appropriate key on the keyboard.)

●[F1]-01 Copy

This Job copies the data of a sample contained in a specified Key Bank to another Key Bank.

Source Waveform, Key Bank

Destination Waveform, Key Bank

●[F1]-02 Delete

This Job deletes the specified Key Bank and its sample.

If the Key Bank is set to “all” and the Job is executed, all the samples of the selected Waveform are deleted.

242MOTIF Reference