Chapter 5 AP Mode

2To set your NBG-417N to AP Mode, go to Maintenance > Sys OP Mode > General and select Access Point.

Figure 24 Maintenance > Sys OP Mode > General

3A pop-up appears providing information on this mode. Click OK in the pop-up message window. (See Section 22.4 on page 186 for more information on the pop-up.) Click Apply. Your NBG-417N is now in AP Mode.

Note: You have to log in to the Web Configurator again when you change modes.

5.3Status Screen (AP Mode)

Click on Status. The screen below shows the status screen in AP Mode.

Figure 25 Status Screen (AP Mode)

54

NBG-417N User’s Guide

Page 54
Image 54
ZyXEL Communications NBG-417N manual Status Screen AP Mode, Maintenance Sys OP Mode General