ZyXEL Communications NBG-417N manual 108, WAN MAC Address

Chapter 8 WAN

Table 40 Network > WAN > Internet Connection: PPTP Encapsulation

LABEL	DESCRIPTION
Password	Type the password associated with the User Name above.
Retype to Confirm	Type your password again to make sure that you have entered is
	correctly.
Nailed-up	Select Nailed-Up Connection if you do not want the connection to
Connection	time out.
Idle Timeout	This value specifies the time in minutes that elapses before the
	NBG-417N automatically disconnects from the PPTP server.
PPTP Configuration
Server IP Address/	Type the IP address of the PPTP server.
Domain
Connection ID/	Type your identification name for the PPTP server.
Name
Get automatically	Select this option If your ISP did not assign you a fixed IP address.
from ISP	This is the default selection.
Use Fixed IP	Select this option If the ISP assigned a fixed IP address.
Address
My WAN IP	Enter your WAN IP address in this field if you selected Use Fixed IP
Address	Address.
My IP Subnet	Your NBG-417N will automatically calculate the subnet mask based
Mask	on the IP address that you assign. Unless you are implementing
	subnetting, use the subnet mask computed by the NBG-417N.
WAN IP Address Assignment
Get automatically	Select this to get your WAN IP address from your ISP.
from ISP
DNS Servers
First DNS Server	Select From ISP if your ISP dynamically assigns DNS server
Second DNS Server	information (and the NBG-417N's WAN IP address). The field to the
	right displays the (read-only) DNS server IP address that the ISP
	assigns.
	Select User-Definedif you have the IP address of a DNS server.
	Enter the DNS server's IP address in the field to the right. If you
	chose User-Defined, but leave the IP address set to 0.0.0.0, User-
	Defined changes to None after you click Apply. If you set a
	second choice to User-Defined, and enter the same IP address,
	the second User-Definedchanges to None after you click Apply.
	Select None if you do not want to configure DNS servers. If you do
	not configure a DNS server, you must know the IP address of a
	computer in order to access it.
WAN MAC Address	The MAC address section allows users to configure the WAN port's
	MAC address by either using the NBG-417N’s MAC address, copying
	the MAC address from a computer on your LAN or manually entering
	a MAC address.
Factory default	Select Factory default to use the factory assigned default MAC
	Address.

108

NBG-417N User’s Guide