Chapter 17 Remote Management
NBG-417N User’s Guide
158
17.3.1 Remote Management Limitations
Remote management over LAN or WAN will not work when:
1You have disabled that service in one of the remote management screens.
2The IP address in the Secured Client IP Address field does not match the client
IP address. If it does not match, the NBG-417N will disconnect the session
immediately.
3There is already another remote management session with an equal or higher
priority running. You may only have one remote management session running at
one time.
4There is a firewall rule that blocks it.
17.3.2 Remote Management and NAT
When NAT is enabled:
• Use the NBG-417N’s WAN IP address when configuring from the WAN.
• Use the NBG-417N’s LAN IP address when configuring from the LAN.
17.3.3 System Timeout
There is a default system management idle timeout of five minutes (three
hundred seconds). The NBG-417N automatically logs you out if the management
session remains idle for longer than this timeout period. The management session
does not time out when a statistics screen is polling. You can change the timeout
period in the System screen