Chapter 15 Static Route
NBG-417N User’s Guide
146
15.3 IP Static Route Screen
Use this screen to view existing static route rules. Click Management > Static
Route to open the IP Static Route screen. The following screen displays.

Figure 80 Management > Static Route > IP Static Route

The following table describes the labels in this screen.

Table 53 Management > Static Route > IP Static Route

LABEL DESCRIPTION
#This is the index number of an individual static route. The first entry is
for the default route and not editable.
Name This is the name that describes or identifies this route.
Active This icon is turned on when this static route is active.
Click the Edit icon under Modify and select the Active checkbox in the
Static Route Setup screen to enable the static route. Clear the
checkbox to disable this static route without having to delete the entry.
Destination This parameter specifies the IP network address of the final destination.
Routing is always based on network number.
Gateway This is the IP address of the gateway. The gateway is an immediate
neighbor of your NBG-417N that will forward the packet to the
destination. On the LAN, the gateway must be a router on the same
segment as your NBG-417N; over the WAN, the gateway must be the
IP address of one of the remote nodes.
Modify Click the Edit icon to open the static route setup screen. Modify a static
route or create a new static route in the Static Route Setup screen.
Click the Remove icon to delete a static route.