Chapter 6 Tutorials
6.2.2Enable and Configure Wireless Security without WPS on your
This example shows you how to configure wireless security settings with the following parameters on your
SSID | SSID_Example3 |
|
|
Channel | 6 |
|
|
Security |
|
| |
|
|
Follow the steps below to configure the wireless settings on your
The instructions require that your hardware is connected (see the Quick Start Guide) and you are logged into the Web Configurator through your LAN connection (see Section 3.2 on page 27).
1Open the Wireless LAN > General screen in the
2Make sure the Enable Wireless LAN check box is selected.
3Enter SSID_Example3 as the SSID and select a channel.
4Set security mode to
Figure 31 Tutorial: Network > Wireless LAN > General
65