ZyXEL Communications NBG-417N manual Product Specifications, 199, Hardware Features

25

Product Specifications

The following tables summarize the NBG-417N’s hardware and firmware features.

Table 67 Hardware Features

Dimensions (W x D x	140 mm x 110 mm x 30 mm
H)
Weight	190 g
Power Specification	Input: 120~240 AC, 50~60 Hz
	Output: 12 V DC 1A
Ethernet ports	Auto-negotiating: 10 Mbps, 100 Mbps in either half-duplex or full-
	duplex mode.
	Auto-crossover: Use either crossover or straight-through Ethernet
	cables.
4-5 Port Switch	A combination of switch and router makes your NBG-417N a cost-
	effective and viable network solution. You can add up to four
	computers to the NBG-417N without the cost of a hub when
	connecting to the Internet through the WAN port. You can add up
	to five computers to the NBG-417N when you connect to the
	Internet in AP mode. Add more than four computers to your LAN
	by using a hub.
LEDs	PWR, LAN1-4, WAN, WLAN/WPS
Reset Button	The reset button is built into the rear panel. Use this button to
	restore the NBG-417N to its factory default settings. Press for 1
	second to restart the device. Press for 5 seconds to restore to
	factory default settings.
WPS button	Press the WPS on two WPS enabled devices within 120 seconds
	for a security-enabled wireless connection.
Antenna	The NBG-417N is equipped with a 2dBi (2.4GHz) detachable
	antenna to provide clear radio transmission and reception on the
	wireless network.
Operation	Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF
Environment	Humidity: 20% ~ 90%
Storage Environment	Temperature: -30º C ~ 70º C / -22ºF ~ 158ºF
	Humidity: 20% ~ 95%

NBG-417N User’s Guide

199