Chapter 7 Wireless LAN
Table 35 Network > Wireless LAN > WDS
LABEL | DESCRIPTION |
Security Mode | Note: WDS security is independent of the security settings |
| |
| between the |
| The WDS is set to No Security by default. |
| • Refer to Section 7.11.1 on page 95 to view the screen for Static |
| WEP security. |
| • Refer to Section 7.11.2 on page 97 to view the screen for WPA2- |
| PSK security. |
|
|
Apply | Click Apply to save your changes to |
|
|
Refresh | Click Refresh to reload the previous configuration for this screen. |
|
|
7.11.1 Security Mode: Static WEP
Use this screen to configure the Static WEP security for your
Figure 54 Network > Wireless LAN > WDS (Static WEP)
95