Agilent Technologies 856290216 Frequency Response Adjustment Menu Softkeys, List Files

Frequency Response Adjustment Menu Softkeys

This section provides a brief description of each menu of softkeys. More detailed information is provided in “Program Operation” in this chapter. The softkey order shown below may vary with what appears on the computer display; the order differs depending on whether an HP 9000 Series 200 or Series 300 computer is used.

Conditions Menu

Ajust Menu

Load Cands

Sensor Utils

Change Entry

Verify Bus

Query DUT S/N

Store Conds

Exit Program

displays the Adjust Menu, which allows you to perform an adjustment. Refer to “Adjust Menu.”

loads the CONDITIONS file from the disk specified by the system mass storage file location.

displays the Sensor Utilities Menu, which allows viewing, editing, and adding power sensor data files. Refer to “Sensor Utilities Menu.”

permits changing a Conditions Menu entry, indicated by the pointer along the left edge of the computer display. Press the (RETURN) or (ENTER) keys to terminate an entry.

checks each listed HP-IB address for response. Verify flus does not verify that a particular piece of equipment is at a specified address.

queries the HP-IB for the serial number and model number of the spectrum analyzer under test.

stores the current conditions in the CONDITIONS file on the specified system mass storage file location.

exits the frequency response adjustment program.

Sensor Utilities Menu

View/Edit

Add File

D e l e t e F i l e

List Files

System File

Cond Menu

allows user to view and edit power sensor data files.

creates a new power sensor data file.

deletes a power sensor data file. User is asked for confirmation before deletion takes place.

lists all power sensor data files on the disk currently specified by the system mass storage file location.

allows user to change the currently specified system mass storage file location.

returns you to the Conditions Menu.

3-12 Frequency Response Adjustment Software