Agilent Technologies Z5623A manual Setting Up the Limit Table, Limit Test... Button

Performance Verification

Setting Up Limit Testing

Setting Up the Limit Table

Step 1. Click Trace on the menu bar. When the Trace menu appears, scroll down to the Limit Test... button and click it. See Figure 5-8.

Figure 5-8 The “Limit Test...” Button

Step 2. When the Limit Test window pops up as shown in Figure 5-9, click the Show Table button, then click the OK button.

Figure 5-9 The “Limit Test” Window

Step 3. When the Limit Table pops up as shown in Figure 5-10, transfer entries from Table 5-4to the Limit Table on the network analyzer. The result is shown in Figure 5-11.

5 -12 Agilent Technologies Z5623A Option H48