Blue Coat Systems SGOS Version 5.2.2 manual Monitoring the System and Disks, System Summary

Volume 9: Managing the Blue Coat SG Appliance

To delete a key:

SGOS#(config sshd) delete director-client-key clientID

Monitoring the System and Disks

The System and disks page in the Management Console has the following tabs:

❐Summary

Provides configuration information and a general status information about the device.

❐Tasks

Enables you to perform systems tasks, such as restarting the system and clearing the DNS or object cache. See Chapter 3: "Maintaining the SG Appliance" for information about these tasks.

❐Environment

Displays hardware statistics.

❐Disks

Displays details about the installed disks and enables you take them offline.

❐SSL Cards

Displays details about any installed SSL cards.

These statistics are also available in the CLI.

Note: The SG 400 appliances do not have an Environment tab.

System Summary

The device provides a variety of information on its status. The fields on the Summary tab are described below:

❐Disks Installed—the number of disk drives installed in the device. The Disks tab displays the status of each drive.

❐Memory installed—the amount of RAM installed in the device.

❐CPUs installed—the number of CPUs installed in the device.

❐Software image—the version and release number of the device image.

❐Serial number—the serial number of the machine, if available.

❐System started—the time and date the device was started.

❐CPU utilization—the current percent utilization of the device CPU.

To view the system summary statistics:

Select Maintenance > System and disks > Summary.

12