Blue Coat Systems SGOS Version 5.2.2 manual Changing Threshold and Notification Properties

Volume 9: Managing the Blue Coat SG Appliance

Table 2-3. Status Health Monitoring Metrics (Continued)

Voltage	Critical:
Bus Voltage	Critical
CPU voltage	High-critical
Power Supply voltage
	Low-critical
	Warning:
	High-warning
	Low-warning
ADN Connection Status	OK:
	Connected
	Connecting
	Connection Approved
	Disabled
	Not Operational
	Warning:
	Approval Pending
	Mismatching Approval Status
	Partially Connected
	Critical:
	Not Connected
	Connection Rejected
	See Volume 5: Advanced Networking for
	more information about the ADN
	metrics.
ADN Manager Status	OK:
	No Approvals Pending
	Not Applicable
	Warning:
	Approvals Pending

Changing Threshold and Notification Properties

The health monitoring threshold and notification properties are set by default. Use the following procedure to modify the current settings.

To change the threshold and notification properties:

1.Select Maintenance > Health Monitoring.

2.Do one of the following:

•To change the system resource metrics, select General.

•To change the hardware/environmental/ADN metrics, select Status.

Note: You cannot change the threshold values for metrics in the Status tab.

• To change the licensing metrics, select Licensing.

3.Select the metric you want to modify.

28