Restoring System Defaults | Blue Coat Systems SGOS Version 5.2.2

Volume 9: Managing the Blue Coat SG Appliance

2.In the Restart field, select either Software only or Hardware and software.

3.If you select the Hardware and software option, select a system from the System to run drop-down list.

The default system is pre-selected.

4.Click Apply.

5.Click Restart now.

6.Click OK to confirm and restart the SG appliance.

Related CLI Syntax to Configure the Hardware/Software Restart Settings

SGOS#(config) restart mode {hardware software}

SGOS# restart abrupt

SGOS# restart regular

SGOS# restart upgrade

Restoring System Defaults

SGOS allows you to restore some or all of the system defaults. Use these commands with caution. The restore-defaultscommand deletes most, but not all, system defaults:

❐The restore-defaultscommand with the factory-defaultsoption reinitializes the SG appliance to the original settings it had when it was shipped from the factory.

❐The restore-defaultscommand with the keep-consoleoption allows you to restore default settings without losing all IP addresses on the system.

Restore-Defaults

Settings that are deleted when you use the restore-defaults command include:

❐All IP addresses (these must be restored before you can access the Management Console again).

❐DNS server addresses (these must be restored through the CLI before you can access the Management Console again).

❐Installable lists.

❐All customized configurations.

34

Image 34

Blue Coat Systems SGOS Version 5.2.2, Blue Coat Systems SG Appliance manual Restoring System Defaults, Restore-Defaults

Contents

Blue Coat Systems SG Appliance Contact Information Contents Diagnostics Appendix a Glossary Index Volume 9 Managing the Blue Coat SG Appliance About Managing the SG Appliance Document Conventions Volume 9 Managing the Blue Coat SG Appliance Using Director to Manage SG Systems Automatically Registering the SG Appliance with Director Registering the SG Appliance with Director Related CLI Commands for Director RegistrationDirector Registration Requirements To register the appliance with a Director Setting up Director and SG Appliance Communication To view the fingerprint of the key To delete a key Monitoring the System and DisksSystem Summary To view the system summary statistics Viewing System Environment Sensors To view the system environment statistics Viewing Disk Status To view disk status or take a disk offline Viewing SSL Accelerator Card Information Setting Up Event Logging and NotificationConfiguring Which Events to Log To view SSL accelerator cards Related CLI Commands to Set the Event Log Size Setting Event Log SizeRelated CLI Commands for Setting the Event Logging Level Enabling Event Notification Related CLI Commands to Enable Event Notifications To enable event notificationsSyslog Event Monitoring To enable syslog monitoring Viewing Event Log Configuration and ContentViewing the Event Log Configuration Related CLI Commands to Enable Syslog Monitoring Viewing the Event Log Contents Related CLI Commands to Enable and Configure Snmp Configuring SnmpTo enable and configure Snmp Enabling Snmp Configuring Snmp Community Strings To set or change community strings To enable Snmp traps Configuring Snmp TrapsRelated CLI Commands for Enabling Snmp Traps Configuring Health Monitoring Health Monitoring Requirements About the Health Monitoring Metric Types About Health Monitoring Health Monitoring Example About License Expiration Metrics About the General Metrics About Health Monitoring NotificationAbout the Licensing Metrics About the Status Metrics Metric Threshold States and Corresponding Values Changing Threshold and Notification Properties To change the threshold and notification properties Getting a Quick View of the SG Appliance Health Viewing Health Monitoring Statistics To review the health monitoring statistics Troubleshooting Related CLI Syntax to View Health Monitoring Statistics Volume 9 Managing the Blue Coat SG Appliance Hardware and Software Restart Options Restarting the SG ApplianceTo restart the SG appliance Restoring System Defaults Restore-Defaults Factory-Defaults Keep-Console Clearing the Object Cache To restore system defaultsClearing the DNS Cache To clear the DNS cache Clearing Trend Statistics Troubleshooting TipClearing the Byte Cache Upgrading the SG Appliance SG Appliance 5.x Version Upgrade To upgrade the SG appliance Related CLI Syntax to Upgrade the Sgos Software Managing SG Appliance Systems To view Sgos system replacement optionsTo view details for an Sgos system version Example Session Setting the Default Boot SystemTo set the SG appliance to run on the next hardware restart To lock a system Locking and Unlocking SG Appliance SystemsReplacing an SG Appliance System To unlock a system Multi-Disk SG Appliances Deleting an SG Appliance SystemDisk Reinitialization To delete a system To delete a single object from the SG appliance Single-Disk SG ApplianceDeleting Objects from the SG Appliance To delete multiple objects from the SG appliance Diagnostics Sending Service Information Automatically Diagnostic Reporting Service InformationTo send service information automatically Related CLI Syntax to Send Service Information Managing the Bandwidth for Service InformationTo manage bandwidth for service information Configure Service Information Settings To send service information SGOS#diagnostics service-info subcommands To create a new snapshot job Creating and Editing Snapshot JobsTo edit an existing snapshot job Following subcommands are available Related CLI Syntax to Edit an Existing Snapshot Job Pcap File Name Format Packet Capturing the Job UtilityCommon Pcap Filter Expressions Configuring Packet Capturing Using Filter Expressions in the CLI To enable, stop, and download packet captures Diagnostics Related CLI Syntax to Define Packet Capturing Settings Viewing Current Packet Capture Data Uploading Packet Capture Data To configure core image restart optionsCore Image Restart Options To view current packet capture statistics To set daily heartbeats and/or Blue Coat monitoring Diagnostic Reporting HeartbeatsRelated CLI Syntax to Manage Heartbeats and Monitoring To configure and view CPU monitoring Diagnostic Reporting CPU MonitoringRelated CLI Syntax to Configure and View CPU Monitoring Volume 9 Managing the Blue Coat SG Appliance Statistics Selecting the Graph Scale Viewing Traffic Distribution Statistics Traffic Mix Refreshing the Data Understanding Chart DataAbout Bypassed Bytes Viewing Bandwidth Usage or Gain About the Default Service StatisticsTo view bandwidth usage or gain statistics Viewing Traffic History Viewing Client Byte and Server Byte Traffic DistributionTo view client and server byte statistics Supported Proxy Types and Services Unsupported Proxy Types Viewing Protocol Statistics Viewing the ADN HistoryViewing Bandwidth Management Statistics To view client and server byte or bandwidth gain statistics SSL History Viewing CPU Utilization Viewing System StatisticsResources Statistics To view CPU utilization Viewing Concurrent Users To view concurrent users To view disk use statistics Viewing Disk Use StatisticsViewing Memory Use Statistics To view memory use statistics Viewing Data Allocation Statistics in RAM and on Disk To view data allocation statistics Contents Statistics Event Logging Statistics To view the event log Active Sessions-Viewing Per-Connection Statistics Failover StatisticsTo view failover statistics About the Proxied Sessions Statistics Analyzing Proxied SessionsViewing Proxied Sessions To view proxied sessions Provided. See Viewing Sessions with Multiple Connections on Cache Hit Is unavailable if the content is non-cacheable or for Cifs About MMS Streaming Connections Using the Tool TipsViewing Sessions with Multiple Connections Understanding the Tree View MMS Filtering the Display What Is Not DisplayedAbout the Byte Totals Viewing Html and XML Views of Proxied Sessions Data Analyzing Bypassed Connections Statistics About the Bypassed Connection Statistics Viewing Bypassed ConnectionsTo view bypassed connections 14. Filter Drop-Down List Viewing Health Monitoring Statistics Viewing the Access LogViewing Html and XML Views of Bypassed Connections Data Viewing Health Check Statistics Using the CLI show Command to View Statistics Statistics Volume 9 Managing the Blue Coat SG Appliance Appendix a Glossary URL Appendix a Glossary Drtr Icmp Volume 9 Managing the Blue Coat SG Appliance MACH5 MIB NTP 100 Network Tunneling tab 102 103 104 Index 106 Snmp 108