139
Syslog Daemon Screen
To open this menu from the main menu, select Configuration → Syslog.
The syslog facility is used to send messages to a central place in your network where messages can be logged. Any message that is entered into the message log of the switch is also sent to up to 20 syslog receivers using IP UDP communication. There are two types of messages in the switch, Warnings and Info messages.
A syslog facility code can be assigned to each of them.
On this screen you can configure up to 20 receivers.
More
Displays more information.
Add Entry
Adds a new entry to the list. To add an entry, select Add Entry and type in the Receiver’s IP address. A menu of available VLANs are then displayed. Select the VLAN to be used for transport (note that more than one VLAN can be selected). After this, select the syslog facility code to be used, first, for Info messages and, second, for Warnings. After this, messages entering the message log will be send to the chosen
Delete Entry
Deletes an entry.
Switch Configuration | SmartStack |