Cabletron Systems STS16-20R, STS16-20D manual Diagnostic Screen, StkPort

73

5. If you still can not get the connection to work, contact a support person.

Diagnostic Screen

The diagnostic self-test displays two different screens, depending on whether you perform a cold boot (power-o n cycle with full diagnostics), or a warm boot (a reset without full diagnostics). The warm boot contains portions of the complete cold boot list.

The following is an example of a diagnostic screen during a boot process. The actual screen may vary depending on, for example, hardware, options, and software version levels:

BootStrap Firmware v2.3, Copyright 1996-1998

- Initiating	bootstrapping sequence.
- Boot image	integrity check...Passed.
- Control transferred to boot process.
Boot Firmware (Phase II) v2.3
- Program memory test		Passed.
- Relocating	main image to
DRAM		Done.
- Main image	integrity check...	succeeded.

-Control transferred to main process.

-Starting Power On Self Test Diagnostics.

- Network memory test 32-bits					........Passed.
-	Network	memory	test	16-bits	........Passed.
-	Network	memory	test	8-bits	Passed.

	- Port register	and memory test	Passed.
	- Single port loopback test		Passed.
	- All ports linked loopback test		Passed.
	- Port MAC test	.....Passed.
- Completed Power		On Self Test Diagnostics.
System Software Version 4.0.0, Copyright 1994-1999.
System started on		Mon. June 21, 1999 14:30:03
8	Megabytes System memory
2	Megabytes Network memory

-Initialization started

-File system initialized

-System temperature is within safe operating levels

-Checking file system integrity

-Warmboot initialization started

-LAN ports detected:

-RJ-45 Token Ring: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

- StkPort : 29

- Initializing Ports: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Accessing Switch Management SmartStack STS16-20D/STS16-20R Token Ring Switches Installation and User Guide