85

is listed as module 2.

Status

Whether the module is up, down, failed, or the slot is empty.

Model

Type of module. The switch is listed for the base switch. For this module as well as for others, this field displays the product number.

Board ID

Decimal identifier of the module.

HW Rev

Hardware revision level. If (4K) is displayed after the number, this module will prevent the switch (or stack of switches) from operating with an MTU size above 4,472 bytes. If HW Rev is set to NA, the module does not support reading of the hardware revision.

FW Rev

Firmware revision level.

Ports

Number of ports on the module.

Up Time

Amount of time that the module has been up (since the last reset).

You cannot change the information that appears on this screen.

Switch Configuration

SmartStack STS16-20D/STS16-20R Token Ring Switches Installation and User Guide

Page 99
Image 99
Cabletron Systems STS16-20R, STS16-20D manual Status, Model, Board ID, HW Rev, FW Rev, Ports, Up Time