Canon 2010F manual Manual Redialing, If you are sending a document using Direct Sending

●If you are sending a document using Direct Sending:

❑The following display appears. When the machine is waiting to redial, be sure to leave the document in the feeder.

NOTE

•To cancel redialing, press (Stop). Redialing is canceled immediately.

•If the TX Error Resend function is ON, the machine also redials when an error occurs during sending.

•For details about setting up automatic redialing, see “Automatic Redialing,” on p. 3-29.

•If the machine does not manage to send the document, the machine waits for another two minutes and dials again. If the transmission fails again, sending is canceled, and an Error TX Report is printed. (See “TX Reports,” on p. 12-2.)

Manual Redialing

	1 Press [FAX].
FAX

FAX lights, and the machine enters the Fax Basic Features screen.

2 Place your documents on the machine.

For instructions explaining how to place your documents, see “Placing

Originals,” on p. 3-6.

NOTE

•You can adjust the resolution, density and image quality. (See “Adjusting the Resolution, Density, and Image Quality,” on p. 3-12.)

•You can also specify a sender’s name with (TTI Selector). (See “Sending a Document with a Sender Name,” on p. 3-15.)

3

Basic Sending

Redialing When the Line Is Busy 3-33