Canon 2010F manual Press Start, After entering the fax number of the party you want to poll

Using Polling

9

NOTE

•In one operation, you can poll several fax machines. You can dial up to 210 telephone numbers and poll those fax machines in order to receive documents that they are holding.

•You must perform the next operation within five seconds of specifying the destination. If you wait longer than the timeout interval, the machine starts dialing automatically, and you cannot specify the ITU-T subaddress and password. The timeout interval can be turned ‘OFF’. (See “Time Out Mode,” on p. 4-7.)

•If the other party has set the ITU-T subaddress and password, you need to enter the same ITU-T subaddress/password in order for your machine to receive their documents. (See “Setting the RX Password,” on p. 10-12.)

Start 6 Press [Start].

The machine starts dialing the other party to poll and receive the document.

NOTE
To cancel polling receiving, press	(Stop). If the message <CANCEL DURING
TX/RX?> is displayed, press F3	(YES).

Setting Up the ITU-T Subaddress and Password for Polling Receiving

To receive a document held under an ITU-T subaddress and password, you have to specify them after dialing the other party’s fax number.

CommunicationAdvanced	1 After entering the fax number of the party you want to poll,
	press [Advanced Communication].

The ADVANCED COMM. menu appears.

NOTE

You must press (Advanced Communication) within five seconds of entering the fax number. If you wait longer than the interval, the machine starts to poll and receive the documents. The timeout interval can be turned ‘OFF’. (See “Time Out Mode,” on p. 4-7.)

9-6Polling Receiving