Canon 2010F manual If you have set Department ID Management, press ID

Stop

ID

•The machine has enough memory (16 MB) to store up to 100 pages* of sent and received documents (fewer if the document contains many graphics or particularly dense text). If you have the optional memory module installed, you can store up to 1500 pages*. *These figures are based on the use of ITU-T No.1 chart, using the standard settings.

•If the memory becomes full while you are scanning a document for sending, the

message <MEMORY FULL> appears on the LCD display. Press (OK) so that the paper remaining in the feeder can be put out. All the pages you were scanning will be cancelled.

•The number of pages you can store into memory differs depending on the amount of free memory remaining in the machine and the type of document you are scanning.

•Press (Monitor) to check the transmission result, or cancel sending the documents stored in memory. (See “Checking Transaction Results,” on p. 3-38.)

7 If you want to cancel sending the document, press [Stop].

8 When scanning is complete, remove your original.

9 If the optional Card Reader-E1 is attached, remove the control card.

For instructions on using the optional Card Reader-E1, see Chapter 3, “Optional Equipment,” in the Reference Guide.

10 If you have set Department ID Management, press [ID].

For instructions on using Department ID Management, see Chapter 6, “System Manager Settings,” in the Reference Guide.

3

Basic Sending

Flow of Fax Sending Operations 3-5