Canon 2010F manual Subaddress

7

Relay Broadcasting

Item	Description	Setting
		SUBADDRESS,
03 TRIGGER	Sets up the ITU-T subaddress, sender’s fax	SENDER’S FAX
	number, or e-mail address.	NO., or MAIL
		ADDRESS
	Sets up the ITU-T password of the relay box. This
	setting is optional. However, if you set an ITU-T	Up to 20 letters
04 RX PASSWORD	password for your relay box, the sending party
		and numbers
	must enter the correct password to send
	documents to your relay box.
	If your machine is the relay unit, this feature forces
05 SELECT ORIG	your machine to check the identity of the	ON*, OFF
UNIT	originator before it receives the document, and
	relays it to other units.
	If your machine is the relay unit, this setting
06 PRINT RX DOC.	determines if your machine prints a copy of every	OFF*, ON
	document that it relays.
	This item enables you to select the fax machines
	to receive the document your machine relays. The	One-touch or
07 SELECT	number of fax machines to receive the document	coded speed
LOCATIONS	must be registered for one-touch or coded speed	dialing, or group
	dialing. You cannot enter a number with regular	dialing
	dialing.
	This feature determines if your machine returns a	NOT
08 TX REPORT	relay transmission report to the originator after	TRANSMIT,
	your machine receives and relays a document.	TRANSMIT*
	You can set your machine to hold documents, and	Up to five times
		to relay
	then relay them at a preset time. If you do not set
09 TX START TIME		documents
	this item, all documents received for relay are
		within a 24-hour
	relayed immediately.
		period everyday.
10 RELAY B'CAST	This feature switches relay broadcasting ‘ON’ and	ON*, OFF
	‘OFF’ without altering any of the other settings.

An asterisk (*) indicates the default setting.

NOTE

•To transmit the TX report to the originator fax machine, you need to set <SELECT ORIG UNIT>.

•If you made a mistake when entering the file name, password, RX password, or destination, use the cursor keys to go back to the position you want to correct ➞ press (Delete) ➞ enter the correct value.

•To delete the entire entry, press (Clear).

7-4Setting Up Your Machine as a Relay Unit