Canon 2010F manual Sending a Document to a Relay Unit with Speed Dialing

Sending a Document to a Relay Unit with Speed Dialing

You can register a telephone number for relay sending under a one-touch speed dialing key or a coded speed dialing code.

Check these points before you send a document to another party for relay broadcasting:

•Contact the other party and ask for the ITU-T subaddress and password they are using for receiving documents they are to relay.

•The other party’s fax machine does not have to be a Canon fax machine, but make sure the other party’s fax machine supports the use of ITU-T subaddresses and passwords.

•Perform the procedure to register a telephone number for one-touch or coded speed dialing. (See “One-Touch Speed Dialing,” on p. 2-3, and “Coded Speed Dialing,” on p. 2-12.)

•If the speed dialing keys are already set up, perform the procedure to change the one-touch or coded speed dialing settings. (See “One-Touch Speed Dialing,” on p. 2-3, and “Coded Speed Dialing,” on p. 2-12.)

•When you set up the speed dialing settings, turn ‘ON’ the OPTIONAL SETTINGS feature, and select <03 TX TYPE>. Select <03 ORIG RELAY TX>, and set the ITU-T subaddress and password. (See “One-Touch Speed Dialing,” on p. 2-3, and “Coded Speed Dialing,” on p. 2-12.)

•Confirm that the other party is set up properly to relay documents received from your machine. Your machine cannot confirm whether the other party’s machine has been set up properly for relaying a document sent from your machine.

Sending with the Advanced Communication Key

Follow the procedure below to send a document for a relay broadcast with the Advanced Communication key.

NOTE

You can set only one destination.

	1 Press [FAX].
FAX

FAX lights, and the machine enters the Fax Basic Features screen.

2 Place your documents on the machine.

For instructions explaining how to place your documents, see “Placing

Originals,” on p. 3-6.

7

Relay Broadcasting

Sending a Document to a Relay Unit for Relay Broadcasting 7-21