Canon 2010F manual Turning ON/OFF the Stamp Feature, Place your documents in the feeder

Turning ON/OFF the Stamp Feature

You can stamp every page you send or scan for sending using the stamp feature. If you place the document horizontally in the feeder, the document is stamped at the position shown in the illustration below.

Stamp

0

IMPORTANT

The stamp feature does not stamp documents you scan for sending using the platen glass or copying.

NOTE

•You can also turn the stamp feature ON/OFF using the Additional Functions menu. (See “Changing the Fax Default Settings,” on p. 10-16.)

•You can select whether the machine stamps documents you scan for direct, and memory sending, or only for direct sending. (See “Setting the Stamp Feature,” on p. 3-17.)

•Be careful, because no information is displayed about the stamp feature even if it is turned ON.

	1 Press [FAX].
FAX

FAX lights, and the machine enters the Fax Basic Features screen.

2 Place your documents in the feeder.

For instructions explaining how to place your documents, see “Placing

Originals,” on p. 3-6.

3 Open all three one-touch speed dialing panels ➞ press [Stamp].

Stamp

The TX STAMP menu is displayed.

3

Basic Sending

Document Stamp Feature 3-19