Canon 2010F manual Press F3 or F4 to set the desired optional setting press OK, Description

2

Speed Dialing

F3

F4

OK

12 Press [F3] (▼) or [F4] (▲) to set the desired optional setting ➞ press [OK].

The display for setting the item you selected appears. The optional settings include the following items:

Item	Description
	Registers an access code from two to five digits to
ACCESS CODE	represent a fax number. (See “Access Code Dialing,”
	on p. 2-27.)
TX TIME SETTING	Preset a time to send documents stored in memory
	automatically.
	Designates the transactions as transmissions to a
TX TYPE	confidential mailbox, part of a relay broadcast, or an
	answer to a polling request. You can also set the ITU-T
	subaddress and password for each feature.
	If you experience transmission errors during
	international sending, change the international setting
INTERNATIONAL	to <INTERNATIONAL 1> and try to send the document
	again. If the problem persists, select <INTERNATONAL
	2>. If you still encounter a transmission error, select
	<INTERNATIONAL 3>.
	If transmission errors occur frequently while sending in
TX SPEED	33.6 Kbps, select a slower speed: 14.4 Kbps, 9.6 Kbps,
	4.8 Kbps, or 2.4 Kbps.
	ECM (Error Correction Mode) reduces system and line
ECM TX	errors during sending or receiving with another fax
	machine that supports ECM.
	If the optional Canon Super G3 FAX Expansion Kit-B1
TX LINE SELECTION	is installed, you can set either telephone line for
	outgoing fax transmissions.
SENDER NAME	Sets the sender’s name to appear on the documents
	the other party receives.

2-16Setting Up Speed Dialing