Canon 2010F 3 Press [F3] (▼) or [F4] (▲) to highlight <07 SYSTEM

Reset 13 Press [Reset] to return to the Fax Basic Features screen.

Access Code Dialing

Follow the procedure below to assign an access code of two to five digits to represent a fax number.

You can assign the access code to (#) or any one-touch speed dialing key.

NOTE

The default setting is ‘02 DO NOT USE’.

Additional Functions	1	Press [Additional Functions].
		The ADDITIONAL FUNCTIONS menu appears.
F3	2	Press [F3] (▼) or [F4] (▲) to highlight <03 FAX SETTINGS> ➞
F4		press [OK].
		Each time you press	F3	(▼) or	F4	(▲), the next or previous menu option
OK

becomes highlighted.

The FAX SETTINGS menu appears.

F3	3 Press [F3] (▼) or [F4] (▲) to highlight <07 SYSTEM
F4	SETTINGS> ➞ press [OK].

2

Speed Dialing

OK

If a System Administrator ID and password are set, enter them after selecting <07 SYSTEM SETTINGS> ➞ press [OK].

For information on entering or setting the System Administrator ID and password, see Chapter 6, “System Manager Settings,” in the Reference Guide.

The SYSTEM SETTINGS menu appears.

Setting Up Speed Dialing 2-27