Canon 2010F Tone key, Line/Mail key, Direct TX indicator, Direct TX key, Main Power indicator

nTone key

Switches to tone dialing temporarily when your machine is connected to a pulse line.

oLine/Mail key

Press to select the telephone line or send an I- fax.

pDirect TX indicator

Lights when Direct Sending is selected as the sending method.

qDirect TX key

Press to use the Direct Sending method, which enables you to send a document ahead of other documents stored in memory.

rOne-touch speed dialing panels

The first panel displays keys 01 to 21. Open the first panel to access keys 22 to 42. Open the second panel to access keys 43 to 63. Open the third panel to access the Fax function keys.

sOne-touch speed dialing keys

Press to dial numbers registered under one-touch speed dialing keys or access the Fax functions when registered as program one-touch keys.

tMain Power indicator

Lights when the main power is turned ON.

uStop key

Press to return to the Basic Features screen, or to stop scanning, printing copies or sending a fax.

vStart key

Press to start an operation.

wID key

Press in order to use the Department ID Management function.

xAlarm lamp

Lights or blinks red when an error occurs. If the alarm lamp blinks, solve the problem by following the instructions on the LCD display. If the alarm lamp maintains a steady red light, call for your local authorized Canon dealer.

yIn Use Memory lamp

A light that blinks red or maintains a steady green light when the machine is copying or there are documents stored in memory.

zInterrupt key

Press to interrupt a continuous copy job when you need to make priority copies.

AAdditional Functions key

Press to enter the Additional Functions menu.

BOK key

Press to set a mode or function.

CBACK key

Press to go back to the previous screen when adjusting settings in a menu.

DFunction keys (F1 to F4)

Select options that appear on the LCD display.

ESpecial Features key

Press to set special copying features, such as Two-Page Separation, Image Combination, Margin, and Frame Erase.

FCopy shortcut keys (1 to 4)

Press to use registered special copying features. The default settings are as follows:

1:Reduce

2:Enlarge

3:Two-Page Separation

4:Frame Erase

You can change the Copy Shortcut keys settings in the Copy Settings menu from the Additional Functions menu.

GCollate key

Press to turn ON/OFF the finisher functions, such as Collate or Rotate. If the optional Finisher-L1 is attached, you can also select the stapler function.

1

Before You Use the Fax Functions

Overview of the imageRUNNER 2010F 1-5