3

Basic Sending

Placing Originals

Place your originals on the platen glass or in the feeder, depending on the size and type of paper that you want to fax, and the settings that you have specified.

■Platen Glass

Place the originals on the platen glass when scanning bound originals, originals on heavy or lightweight paper, and transparencies.

■Feeder

Place a stack of originals in the feeder ➞ press [Start]. The machine automatically scans them into memory.

NOTE

•The size of the original is automatically detected, and the document is scanned. However, if the output paper in the machine at the receiving end is not equal to the scanned size, the original image is either reduced in size to match the size of the output paper at the receiving end, or is divided into parts before being sent.

•The machine cannot always detect the size of the original if it is a nonstandard size or object, such as a book. In this case, specify the size at which you want to scan the original. (See Chapter 2, “Basic Copying Features,” in the Copying Guide.)

3-6Placing Originals