Canon 2010F manual If you want to set an access code, TX Time Setting

F3

F4

OK

@. ABC DEF

1 2 3

GHI JKL MNO

4 5 6

PRS TUV WXY

7 8 9

OPER SYMBOLS

0

OK

Item	Description
TX TIME SETTING	Preset a time to send documents stored in memory
	automatically.
	Designates the transactions as transmissions to a
TX TYPE	confidential mailbox, part of a relay broadcast, or an
	answer to a polling request. You can also set the ITU-T
	subaddress and password for each feature.
	If you experience transmission errors during
	international sending, change the international setting
INTERNATIONAL	to <INTERNATIONAL 1> and try to send the document
	again. If the problem persists, select <INTERNATONAL
	2>. If you still encounter a transmission error, select
	<INTERNATIONAL 3>.
	If transmission errors occur frequently while sending in
TX SPEED	33.6 Kbps, select a slower speed: 14.4 Kbps, 9.6 Kbps,
	4.8 Kbps, or 2.4 Kbps.
	ECM (Error Correction Mode) reduces system and line
ECM TX	errors during sending or receiving with another fax
	machine that supports ECM.
	If the optional Canon Super G3 FAX Expansion Kit-B1
TX LINE SELECTION	is installed, you can set either telephone line for
	outgoing fax transmissions.
SENDER NAME	Sets the sender’s name to appear on the documents
	the other party receives.

●If you want to set an access code:

❑ Press [F3] (▼) or [F4] (▲) to highlight <01 ACCESS CODE> ➞ press [OK].

❑Use the numeric keys to enter an access code (two to five digits) ➞ press [OK].

The display returns to the OPTIONAL SETTING menu.

NOTE

You need to set the access code to ‘USE’ first. (See “Access Code Dialing,” on p. 2- 27.)

2

Speed Dialing

Setting Up Speed Dialing 2-7